Model #8727 PEERLESS Faucet

  • Single Handle Washerless Tub And Shower Valves
    3 Results
Find part by diagram >

Question and Answers

Q:

Our Kenmore Elite HE3t is not starting after adding a garment. How do I fix it?

A:

I understand how important it is for your Washer to be working so that you can do your laundry without any further delay and although your washer is not working properly, I will be happy to help. While you are waiting for an expert answer, I did mange to find a link that will provide you with more information about your problem.

Read More
Priscilla V -
June 14, 2011
A:

Thankyou, Model 110 44932 200 Serial CSN 050 8727 Type 199 - AKP 706/WT Maybe this will help.

Read More
Colton -
June 14, 2011
A:

Thankyou for all you help I fixed it by turning off the washing machine then turning it back on.

Read More
Colton -
June 14, 2011
A:

Thank you for your question and I understand your concern.

The control is not likely detecting the door being closed or is unable to lock the door. This is probably what is causing the time remaining to continue blinking. The cycle will not continue if the door cannot be locked. Try completely unplugging the washer and then plug it back in after a few minutes. If the control resets and the door is properly detected as shut, the washer should detect water in the tub and will start the drain pump to drain the water. This may reset the washer so that you can start a new cycle.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
June 16, 2011
See more answers