Model #867734690 KENMORE Furnace/Heater, Gas

  • Cabinet
    3 Results
  • Body
    3 Results
  • Burner Compartment
    3 Results
  • Vent Shield Kit No. 42-7311
    3 Results
  • Electrical
    3 Results
  • Fan Orifice Assembly
    3 Results
  • Horizontal Vent Kit No. 42-7369
    3 Results
  • Rear Wall Register Kit
    3 Results
  • Rear Wall Register Kit Stock No. 42-7312
    3 Results
Find part by diagram >

Question and Answers

Q:

Can someone post the owner's manual or installation manual for Kenmore wall furnace model 867.734690?

A:

I checked all of our resources for a copy of the owner's manual or installation manual. There is not a hard copy or electronic copy available. Since this wall furnace appears to be over 30 years old, these documents are not likely available.

Read More
Lyle W -
Sears Technician
January 21, 2010
Q:

How do I change 1 amp fuse on Kenmore Model #867734690 Furnace?

A:

This fuse will probably be located on the ignition module. The wiring diagram does not show a fuse. Normally, when diagrams don't show a fuse, it's usually included with the control board or module. It’s only there to protect the board or module. Since this furnace does not have a board, it will probably be on the module. If you still cannot locate it, I recommend having a technician check it.

Read More
Scott D -
Sears Technician
January 19, 2010