Model #8600 PEERLESS Faucet

  • Single Handle Washerless Lavatory Faucets
    3 Results
Find part by diagram >

Question and Answers

Q:

the ribbon tape came out of control can you re insert it MDB8600AWS Maytag Maytag dishwasher

A:

Thank you for contacting Sears. I will be more than happy to assist you with your Maytag dishwasher.

I can understand the frustration of your dishwasher not functioning properly, after researching model number MDB8600AWS. The ribbon cable should plug into the power control board on the back. You may need to remove screws from the front of the board to access the back and find the connector that the ribbon cable plugs into. If the ribbon is damaged the part will need to be replaced.

I hope you found this information useful. Again thank you for choosing Sears. We appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
July 07, 2015
Q:

Water spilled on LG 55LM8600 TV LG 55LM8600

Q:

Why don't the dishes on the top rack dry? MDB8600AWW Maytag Maytag dishwasher

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dishwasher. Upon researching model MDB8600AWW; it sounds like the heat element may need to be replaced. If the heating element is not working properly then the correct temperature will not be reached to dry the top and bottom racks. You can unplug the dishwasher power cord, remove the element and thermostat when the unit is not hot. With the thermostat and element removed you can test the parts for continuity using a multi meter, if the test reads continuity then the part are ok.  In case the test reads no continuity then the part with no continuity may need to be replaced.

I trust this information will help you, we appreciate your business thank for choosing Sears.

                          

Read More
CarlosZ -
Sears Technician
March 11, 2015