Model #850 SERIES KEYS Treadmill

  • Treadmill/questions/caution
    3 Results
  • Contents
    3 Results
  • Unpacking Instructions
    3 Results
  • Important Safety Information
    3 Results
  • Important Safety/decal Information
    3 Results
  • Before You Start
    3 Results
  • Moving Instructions
    3 Results
  • Operation/adjustment
    3 Results
  • Operations Guide/caution
    3 Results
  • Operations Guide
    3 Results
  • Operations Guide Page 2
    3 Results
  • Operations Guide Page 3
    3 Results
  • Operations Guide Page 4
    3 Results
  • Operations Guide Page 5
    3 Results
  • Operations Guide Page 6
    3 Results
  • Operations Guide Page 7
    3 Results
  • Operations Guide Page 8
    3 Results
  • Calibration Procedures
    3 Results
  • Walking Belt Adjustment
    3 Results
  • Maintenance Instructions
    3 Results
  • Folding Instructions
    3 Results
  • To Raise The Treadmill For Storage
    3 Results
  • Troubleshooting
    3 Results
  • Troubleshooting Page 2
    3 Results
  • Exercise Guidelines
    3 Results
  • Treadmill
    3 Results
  • Treadmill Page 2
    3 Results
  • Treadmill Page 3
    3 Results
  • Treadmill/questions
    3 Results
Find part by diagram >

Question and Answers

Q:

Hiow to ID a part and order for a 850 series Tiller 1202020780E1 Briggs&stratton Engine

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.


692317 is the connector you are needing.

 Connector Housing Part 692317

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
July 13, 2015
A:

Thank You.

Read More
Stuart -
July 13, 2015
See more answers
Q:

How to change the V-belt on a Craftsman 850 Series Model No. 917.297041.

A:

Changing the v-belt on the Craftsman tiller is made easy with instructions in the Owners manual on page 17.  Hope this is helpful.  Additional information may take two business days usually sooner.

Read More
Anna T -
May 05, 2013
A:

I can understand how important it is to have the right information for your tiller. The instructions on how to change the belt for this model are located on page 17 of your owner's manual. If you don't have a copy of it, just click on this link to download and print a copy: Owner's Manual. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
May 06, 2013
See more answers
Q:

I have a craftsman rear tine tiller, can not figure out which oil fill to use to determine "OIL LEVEL FULL"

A:

Managemylife.com is always a great resource to find the answers to just about anything.  I added a link to your owners manual, while you wait for the expert reply.  Have a nice day!

Read More
Yadira B -
April 18, 2013
A:

Hi Yadira, Thanks for the link, however I have the original owners manual. One problem is that the diagrams in the original owners manual do not correctly represent the engine itself. Thanks, mark

Read More
MarkASparks -
April 18, 2013
A:

Thank you for your question and I understand your concern.

The oil level is checked and added from the plug at the front of the engine (the higher one). The lower one at the front that's not at angel is for draining the oil. The oil capacity when empty is 19 ounces.  There is also one on the rear but it would have been used for other applications where it would possibly have a dip stick.

The oil level should be up the bottom of the threads when the tiller is sitting on a level surface.  See page 15 in the Owner's Manual.

 I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

Read More
Joey S -
Sears Technician
April 19, 2013
A:

Hey Joey, Thanks for the help, I found that the oil fill on my tiller is the top one in the front. Another one in the front has a white plug on it is the one used to check for proper oil leve. I put 19 ounces in it and it comes the the threads just like the owners manual said it is supposed to. Thank You,

Read More
MarkASparks -
April 22, 2013
See more answers