Model #8504237290 KENMORE Ranges, Electric

  • Control Section
    3 Results
  • Body Section
    3 Results
  • Oven Door
    3 Results
Find part by diagram >

Question and Answers

Q:

old Kenmore electric wall oven

A:

Managemylife.com is always a great resource to find the answers to just about anything. I know this information will be very helpful for you to have. I was able to find this expert's answer. The link is attached below. Check out the all links that are in this response. I hope this will help you out.

Read More
James -
January 18, 2012
A:

I checked for documents or specifications on that older model of wall oven but I did not find anything. The installation guide is no longer available as a replacement part. That document is not available online. I recommend that you physically check the actual cabinet cut-out dimensions for your current model. You can compare those dimensions to the ones in this installation guide for the model 4045 (full model 790.4045 . . .): Installation Instructions . If the cabinet cut-out dimensions are the correct size, then you should have no problems getting the oven installed. Most of the 24" ovens are a standard size. If your current oven is a 24" wide model and you are replacing it with a 24" wide model then the new oven will probably fit.

I hope that this information helps. If you need more assistance, let us know.

Read More
Lyle W -
Sears Technician
January 18, 2012
See more answers