Model #836 TROYBILT Walk Behind Lawnmower, Gas

  • Wheel Assembly
    3 Results
  • Deck/drive Control/grass Catcher
    3 Results
Find part by diagram >

Question and Answers

Q:

I need staples for my Craftsman 9.6 volt cordless stapler. model # 836.272350

A:

Thank you for your question.

 

I will be happy to assist you. I looked up the model number you submitted. I could not find a manual for this model. The best I can tell is the stapler uses T50 or compatible staples. I recommend taking the stapler to the store with you. Then test fit the staples to be sure they fit.

 

I hope this is helpful.  

 

Thank you for using Manage my life.

 

Mark T.

Read More
Mark T -
Sears Technician
October 25, 2013
A:

I have that stapler. It takes 3/16" narrow crown "U" staples. They come in three sizes: 5/16, 9/16, 3/8".

Read More
Dennis -
July 25, 2015
See more answers
Q:

I have a model 836.886350 snow blower and the bearings have failed many times resulting in the jack assembly being crooked and shearing off the teeth 536886350 Craftsman Snowthrower

A:

Has anyone else had this problem?

Read More
Franksharpe -
February 22, 2014
A:

I should say it is the small sprocket of the Jack Shaft that gets the teeth chewed off by the crooked chain alignment.

Read More
Franksharpe -
February 22, 2014
A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
May 13, 2014
See more answers
Q:

refrigerator skins

A:

Thank you for contacting SearsPartsDirect.com with your question about refrigerator "skins" for a Kenmore Elite refrigerator. I will be happy to help you with this but will need some clarification. By the skins, do you mean the outer coating of the refrigerator? And are you talking about the skins for the doors, or the complete refrigerator?

The outer coating on a refrigerator cabinet does not come off so to change the color of the refrigerator one option would be to paint it. If you only need to change the facing of the doors, you maybe able to order the doors. They come with the insulation and the inner paneling already in place. The doors range in price from a couple of hundred dollars to over a thousand depending on the model of the refrigerator. Another option you have would be to have custom panels made for the doors. There is a company that specializes in this called Frigo. Their contact phone number is 1-800-836-8746.

I hope this information helps. If you need further assistance, please resubmit your question with the model number of the refrigerator. Please include a description of what you mean by "skin" and we will be happy to help you further. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
April 28, 2014

Top Parts