Model #831298400 PROFORM Treadmill

  • Console
    3 Results
  • Walking Board
    3 Results
Find part by diagram >

Question and Answers

Q:

Circuit breaker on Performa treadmill breaks after a few minutes

A:

I'm sorry to hear that you are having some difficulties with your Treadmill. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. I hope the link provided assist you.

Read More
Priscilla V -
December 06, 2011
A:

This is most likely going to be the power board (136800) causing the problem. I think you may have submitted a similar question (without the model number) and I advised that the controller would be the problem. That would be the case if your model just had the 1 board, but I see now that your model has 2 boards, so it will be the power board causing the problem.

The transformer that you see discolored is the "choke" for the motor. It does generate some heat when in use but that's not generally going to cause this sort of problem. They will often appear to be have been hot so that's not a surprise. Typically when it fails the problem you see is that the belt won't run but everything else works.

Your power board is part number 136800 and it's available HERE .

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
December 07, 2011
See more answers
Q:

What type resistor is in space R42, near D7 speed control LED, on controller board of 831.298400 treadmill?

A:

We don't have any information on the different parts used on the treadmill boards. If I tried to get the information about the resister I would have to go through Proform. They don't give that type of information out.

Our techs don't repair circuit boards so we have no use for the information.

Read More
Jimmy K -
Sears Technician
March 04, 2009

Top Parts