Model #831297762 PROFORM Treadmill

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

I have a Pro Form 725TL Model Number 831297762 that runs really fast when key is inserted.

A:

It can be difficult keeping track of all manuals with just manuals for every item in a home. I have taken some time to research your question here on Manage My Life and I was able to locate an owners manual for you. I attached the link below for you to view. I hope the link that I provided is useful.

Read More
Alina F. -
January 23, 2011
A:

I suspect you have some shorted wires in the wire harness between the console and the power supply board.

Disconnect the power to the treadmill before disconnecting any wires.

Try disconnecting the wire harness from the console and the power board. Check for continuity between each of the 8 wires to the other 7. If there is any continuity, you need to replace the wire harness or repair the short.

If the drive motor is shorted to ground, it will run full speed when power is applied. Disconnect the red wire to the motor from the A+ terminal on the motor controller. Disconnect the black wire from the choke to terminal A- on the controller. Read the resistance between red and ground and black and ground. If you get anything besides an open circuit, the motor is shorted and needs to be replaced.

If you have more questions, reply on this thread and we will be glad to help.

Read More
Jimmy K -
Sears Technician
January 24, 2011
A:

We checked the wires and there is continutity, so we are going to try a new wire harness. Also we got an open circuit on the motor so we think that is good. Thanks so much for your help.

Read More
Anonymous -
January 30, 2011
See more answers
Q:

the headband is no longer sold for my treadmill 831297762 can i check my pulse without it also i for got hot to use the left side of my treadmill i read

A:

You can use a regular independent heart rate monitor that is not connected to the treadmill to measure your pulse rate. There are many various types of heart rate monitors available on the Sears.com website. I recommend that you visit that site and look for one that will fit your needs.

Here is a link for the manual on your model of treadmill: Owner's Manual . The automatic programs are on the left side of the console. I assume that those are the functions that you are looking for help with. After you insert the key, press the MODE button to select the automatic program that you want to use. LbS will flash in the calories display for 7 seconds. During the interval you can change the weight by pressing the up or down arrows on the WEIGHT button or let it default to what it is already set at. Then AGE will flash and you can change your age setting in a similar manner. After setting age you can then set the maximum speed of the program or let it default to the speed that in the display. Use the MAX SPEED button to change this setting. After the maximum speed is set, press START/PAUSE to begin the program. There are more details for setting the automatic programs on page 13 and 14 of the owner's manual.

If you need more help, resubmit your question with additional details.

Read More
Lyle W -
Sears Technician
May 04, 2010

Top Parts