Model #831297740 PROFORM Treadmill

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

831297740 platform belt how do i access -- i tried but not finding send diagrams or anything -- thnks

A:

Belt adjustments or replacement do require instructions and diagrams. I did some preliminary searching and was able to locate a similar questions with information to help while you wait for the expert response. I attached the link below. I hope this helps.

Read More
Barbara H. -
February 10, 2012
A:

Hi Petelos,

         

Thank you for submitting a question to Manage My Life.

         

The link that Barbara gave you above gives the complete instructions for replacing the belt on a treadmill like yours.

         

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

         

Here is a link that you may use to view the parts list diagram or to purchase any parts needed; Sears Parts Direct .

         

I hope this is helpful. If I may be of further assistance please reply to this post.

         

Landell

Read More
Landell -
Sears Technician
February 11, 2012
See more answers
Q:

How to install belt on my treadmill.

A:

I know how important it is for you to have your owners manual. I researched your question and was able to locate your manual. I attached the link below. I hope this helps.

Read More
Jackie S -
February 02, 2012
A:

Thank you for your question.

I will be happy to assist you with replacing the belt on the treadmill. I have posted a set of instructions for replacing walking belt. Just click on the image to enlarge it.

Please be sure to unplug the treadmill before attempting any service on the treadmill.

I hope this is helpful. Please reply below with more details if you need further assistance.

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
February 02, 2012
A:

Here are the rest of the images.

Read More
Mark T -
Sears Technician
February 02, 2012
See more answers
Q:

Treadmill has an error code: E4. How do I fix it?

A:

Treadmills have become very sophisticated today and have many features to help keep us in shape. The electronics will also tell us when there is a problem with itself. I located an answer from a previous expert post that may just get you back on track. I attached the link below. Hope this helps.

Read More
Barbara H. -
May 14, 2011
A:

I am sending you an image that explains the error codes on your treadmill and offers suggestions of what can cause them. The most common cause of an E4 error is a worn belt or walking board or a walking belt that needs lubrication.

To test the walking belt lubrication, do not turn the treadmill motor on. Set the elevation to the highest level. Stand near the front of the walking belt. Push yourself firmly toward the rear of the treadmill. If the belt is properly lubricated the belt will take you to the rear edge of the treadmill and dump you off on the floor. If you move and stop, the belt needs lubricating.

The part number for the belt lubrication kit is 219168. You can buy it at [www.searspartsdirect.com]. The cost is around $4.00. The application instructions should be in the package, but in case they are not here is how to apply the lubrication.

Turn the walking belt until the belt seam is along the top of the front roller. Raise the belt on one side in the center of the walking board front to back as high as you can. Apply � the tube of lubrication to the walking board in a zig zag fashion moving from front to back. Move the belt until the seam comes up on top of the rear roller and lift the belt again and put the rest of the lubrication on the walking board in the same manner. Turn the treadmill on and walk on the belt for 10-20 minutes. Walk all over the belt to distribute the lubrication evenly on the walking belt and board.

To test the walking belt and board for wear, lift the walking belt and inspect the top of the walking board and the bottom of the walking belt for worn spots. Both surfaces should be smooth and slick. If you find worn places on either part, it should be replaced.

Read More
Jimmy K -
Sears Technician
May 16, 2011
See more answers

Top Parts