Model #831297642 PROFORM Treadmill

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

No speed readout 831297642 Proform Proform space saver 580si

A:

Thank you for choosing Sears Parts Direct. I will be happy to help you with the speed not reading out. Upon researching model 831297642 I show the speed reads out on the console. If the speed control is working then it seems like the display portion is out. The console could have to be replaced.

Click here for diagram. Number 10 is the console.

If you have any further questions please repost. Thank you for choosing Sears. Have a great day.

 

Read More
Jeff Wallace Jr -
Sears Technician
July 17, 2014
A:

The speed readout was working until I changed out the front roller. The display is still working, it shows 0.00 and does not change as the speed changes.. All four displays function ( show 0.00) the only one that changes is the time. Is there a pickup that could have been affected by the roller replacement?

Read More
J -
July 17, 2014
See more answers
Q:

walking belt is off-center moved toward the left 831297642 Proform Proform space saver 580si

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
May 13, 2014
Q:

Which instructions do we use to replace a treadmill walking belt if none of the model numbers match our model?

A:

Having to wok on replacing the belt on your Treadmill can be challenging. I have taken the time to research on the Manage my life website and have located a few links similar to your issue. While you are waiting for a detailed reply from an expert I have attached the links below. Hope this helps!!

Read More
Priscilla V -
October 02, 2011
A:

Thank you for your question.

Replacing the belt on your treadmill is fairly difficult and time consuming. In addition, there are no really detailed instructions for replacing it since a professional would typically do that type of service. We do not have a treadmill service manual that shows how to replace the walking belt.

The basic instructions are listed below to help you.

  1. Unplug the treadmill from the power source.
  2. Remove the motor hood on the front of the treadmill.
  3. Remove the right foot rail.
  4. Remove the rear roller adjusting bolts.
  5. Remove the front roller adjusting bolt. Make sure to count the number of turns it takes to remove the bolt. Then when you reinstall the bolt, you can get it in the same place.
  6. Remove the front roller.
  7. Remove the screws from the right side of the walking board. Then lift the walking board and slide the walking belt off the board.
  8. Reverse the instructions to reassemble the treadmill.
  9. Before installing the motor hood carefully check the operation. The drive belt might need to be adjusted.
I have added the instructions for adjusting the walking belt below. Again, this is a fairly involved repair, so if you have any concerns or reservations you may want to consult a professional.

I hope this is helpful. Please reply below if you need further assistance. Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
October 02, 2011
See more answers

Top Parts