Model #831297560 IMAGE Treadmill

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

treadmill image 10.6

A:

When you have a fitness goal or just love to workout, it is disappointing to find your treadmill isn't working properly. I can see why you are in need of advice to repair your treadmill. I was able to find a link that includes great detailed information for the E3 error code displayed on your treadmill. I attached the link below. I would suggest providing the full and complete model number to better assist the expert. Just add to this thread. I hope this helps.

Read More
Jackie S -
May 07, 2012
A:

I provided some technical information for the E3 code in the image below. Since that belt cannot be adjusted, your failure could be in the console or the control board. You may be able to use that diagram to carefully check the voltages through the wiring harness. NOTE: You should only conduct those live voltage checks if you are completely confident in your technical ability to safely take those readings. Wear electrical safety gloves and safety goggles when conducting live voltage checks. Unplug the treadmill as soon as live testing is completed . If you need more help, reply with additional details and we will assist you further.

You can order parts from this page: Image 10.6 Treadmill 831.297560 Parts .

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
May 09, 2012
See more answers
Q:

I have an Image 10.6 Treadmill Model 831.297560. It "Lights up" but doesn't run. Can you repair in the home?

A:

Call 1-800-469-4663 and ask the agent if the repairman that is scheduled for your Jenn-Air can repair the treadmill as well.

Treadmills are normally repaired in the home. A Sears technician will be able to repair the treadmill in your home.

Read More
Jimmy K -
Sears Technician
December 09, 2009

Top Parts