Model #831297153 PROFORM Treadmill

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

substitute walking belt for treadmill too wide/do I trim? 831297153 Proform Lifestyler expanse 550

A:

Thank you for contacting SearsPartsDirect.com with your question about the replacement walking belt for your treadmill. I am so sorry the part you received is too wide for your model. Replacement parts should fit the same as the original part and would not require trimming. Please contact our PartsDirect Customer Care department at 1-800-366-7278. It sounds like we may have shipped you the wrong part. Our customer care advisor will be happy to assist you with returning that part and getting the right part for your treadmill sent out.

I apologize for the inconvenience this has caused you. Thank you for choosinig Sears, we appreciate your business.

Read More
Rachel Morgan -
Sears Technician
January 13, 2014
Q:

Just ordered part number 109382 for my lifestyler expanse 550 treadmill. I am not sure how to install it.

A:

Good afternoon... I can fully understand your concern regarding this issue. I did locate a link that will discuss this situation in greater detail. Though this link discusses a different model number, the mechanics are likely going to be very similar. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help guide you to replacing that breaker and have a good day.

Read More
Henry -
January 31, 2013
A:

Thanks for contacting ManageMyLife.com. I see Henry provided you a great link with information above. Here is the information you need for replacing part 109382. Unplug the machine from the wall and remove the motor hood that covers the motor and electronics at the front of the machine. When you have the hood (cover) off, you should see the back side of the breaker where it goes through the housing. Take the wires off of the breaker and it should pop out of the housing. Put the new one in and plug the wires back up. Then put the cover back on and it should be ready to run again.

If you do not feel comfortable repairing this problem yourself, then you can have it repaired at your home by a Sears technician. You may visit SearsHomeServices.com , follow the instructions and click on the red next button to set service.

Please feel free to let me know if you need further assistance.

Thank you for using ManageMyLife.com.

Read More
Jonathan B -
Sears Technician
January 31, 2013
See more answers
Q:

how not to use incline on model number 831297153

A:

It's always good to know how to change the settings and options on your treadmill. I did some research and provided a link to the manual for your specific model. You can take a look on page 9 for the settings on the incline. I hope this will shed a little more light on the issue until the Expert responds to your question in more detail within 24 to 48 hours.

Read More
Julio -
August 09, 2012
A:

I assume you want the incline to not function when you are using the programs on the treadmill. For that, there isn't a way to bypass the incline function as the programs are set in at the factory.

You will likely have to manually set the speed when you're using the treadmill rather than the pre-set programs.

Thank you for using Manage My Life!

Read More
Wade_B -
Sears Technician
August 10, 2012
See more answers

Top Parts