Model #831296750 PROFORM Treadmill

  • Console/handrails
    3 Results
  • Walking Belt/motor/hood
    3 Results
Find part by diagram >

Question and Answers

Q:

Pro Form Treadmill 831296750 Proform Treadmill

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Barbara -
April 27, 2013
A:

Hello Clinton. I posted a wiring diagram for that treadmill in the image below. That should help you replace the wires on the motor. If you need more assistance, let us know.

Read More
Lyle W -
Sears Technician
April 29, 2013
See more answers
Q:

Pro-Form Treadmill front roller/pulley - treadmill stops

A:

I can understand your concern when the roller pulley on the Proform treadmill is stripped and need replacing. An expert will research and respond on your specific question within two business days. If service is needed that link is provided.

Read More
Anna T -
January 29, 2013
A:

I know that it can be very difficult to have issues with your treadmill. Try this: Incline the treadmill all the way up. Then stand at the front of the walking area and give yourself a slight shove. You should slide back 75% of the way. If you do not go that far back then you will need to lubricate the walking belt. You can order kit number 219170 from HERE . If the belt does not seem to need lubrication it may be that the controller is failing. You can try putting the treadmill through the calibration mode to see if that can be corrected.

Press and hold the stop and speed "up" key while you insert the safety key. Once in the calibration mode press the stop button to get into level 2 of the calibration. Then press the speed up button and the belt should begin to move. It will go to top speed then slow back down to a stop. After the belt stops remove the safety key. Put the key back in and then try the treadmill to see if anything has changed. If the problem is still present then the controller will need to be replaced. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
January 29, 2013
A:

Thanks for the response, appreciate the insight. The issue isn't the controller or the walking belt etc, it's the front roller and the pulley that attaches to the roller. They are two different peices although the manual says it's one part? The pulley and roller spin ok until you walk on the treadmill, then the pulley spins (as the moter and motor belt runs fine) but the front roller doesn't and makes a noise (like the the pulley insides are stripped?). The roller is metal and the pulley is hard plastic. (Rlr,drive,ar PART NUMBER: 235445)

Read More
Jim -
January 30, 2013
A:

Thank you for replying with this information. If the roller is not spinning when you apply pressure to the belt, then I would suspect that the pulley is malfuctioning. However, I would pull the pulley off of the treadmill and check it. If it is stripped, it will be visable. Please let me know if you need anything else. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
January 30, 2013
See more answers
Q:

Proform Treadmill - motor stops

A:

When the Proform treadmill just won't go, managemylife.com has the answers to your problems. Just click on the link provided below. Hope this helps while an expert responds with additional information. If you decide on service, that link is also provided below.

Read More
Anna T -
January 02, 2013
A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with the belt not moving on the treadmill. We are here to help. Anna did provide you a good link on this problem. Before the black cover is removed unplug the treadmill. Next, remove the black cover. Now check the motor belt, and pulley. If they are good, plug in the treadmill and turn it on. Select a slow speed and observe what is happening. Is the motor belt turning? Is part of the front roller turning and not the other? Is the motor just humming? If the motor is just humming, I suspect a problem in the motor control board. Otherwise, the pulley set screw may be loose or the front roller may be bad. I hope this helps.

To order treadmill parts, please visit SearsPartsDirect.com with the model number.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Read More
John H -
Sears Technician
January 03, 2013
A:

Thanks for responding. I haven't pulled the black cover off to check. I'll unplug the trendmill before doing so. Yesterday I ran it at various speeds with no one on the treadmill, and it wasn't doing it's sudden stopping like when someone exercises on it. You can go for several minutes on the trendmill with it running fine, then it suddenly stops spinning (the roller in the front that runs the belt) even though you can hear the motor still running. I'll look at this over the next 36 hrs or so.

Read More
Jim -
January 03, 2013
A:

Think I found the problem. When I opened up the black cover in the front of the trendmill, I noticed the drive moter was off center and the motor belt that drives the treadmill belt looked to be a little worn from the motor being off centered. I'll try and order a new belt and reposition the drive moter. Not sure how tight it should be, but I'll try this. Thanks for your help! Jim

Read More
Jim -
January 07, 2013
See more answers

Top Parts