Model #831295062 PROFORM Treadmill

  • Walking Belt/hood/motor
    3 Results
  • Uprights/console
    3 Results
Find part by diagram >

Question and Answers

Q:

motor controller 831295062 Proform Treadmill xp590s

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
May 13, 2014
Q:

What would cause the belt on my Proform treadmill model 831.295062 to stop?

A:

One of the belts could be slipping. To determine which belt it is, you will need to remove the hood. Carefully start the treadmill and walk on the belt. Watch the motor and the front roller. If the front roller still turns when the belt stops, you will need to adjust the walking belt. If the front roller stops but the motor still turns, the drive belt will need to be adjusted. To tighten the drive motor loosen the mounting bolts. Pull the motor until the belt is tight. Then tighten the mounting bolts while keeping the belt tight.

I have provided you with the instructions on how to tighten the walking belt.

If the motor stalls when you walk, it could be a faulty motor. I recommend calling for service at that point. You can schedule service on line. Here is a link for the website: Sears Home Services .

Read More
Mark T Personal Solutions Manager -
Sears Technician
January 16, 2010
Q:

Why does the belt on my treadmill stop turning?

A:

I would begin by adjusting the belt. To test the walking belt tension, do not turn the treadmill motor on. Set the elevation to the highest level. Stand near the front of the walking belt. Push yourself firmly toward the rear of the treadmill. If the belt is properly adjusted the belt will take you to the rear edge of the treadmill and dump you off on the floor. If you move and stop, the belt needs to be adjusted.

Read More
Landell -
Sears Technician
January 08, 2010
A:

ertert

Read More
Geese_duck -
January 12, 2010
See more answers

Top Parts