Model #831294040 PROFORM Treadmill

  • Console/walking Belt/motor/hood
    3 Results
Find part by diagram >

Question and Answers


treadmill 831294040 Proform Proform x-walk 515s


Hello glad to help.  Thank You for choosing Sears
I am sorry and do understand your frustration when there is problems with the treadmill.
Glad to help out.   Im  looking at your Proform model number 831.294040.

Without being there to look at it, it sounds like  your motor cotroller board is bad or the motor controller wire.

I have a picture on the link below.  the motor controller is key number 59 and the wire is key number 56.

treadmill pic of model 831.294040

If you have further questions please let me know.
Thanks for choosing Sears

Read More
Larry L -
Sears Technician
February 11, 2014

Treadmill does not run.


I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the treadmill. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Barbara H. -
January 08, 2012

You can very likely just replace the controller board (pt 248180) and be fine. There is a chance that the console took a hit as well, but it's unlikely if the treadmill was not in use when the surge happened. If the console is bad the whole treadmill will have to be replaced as it is no longer in production.

You can order the controller HERE as needed.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
January 10, 2012
See more answers

What can one do if the treadmill key clip is unretrievable or missing?


I am sorry you had so much trouble getting an answer. The safety Key/Clip should have been included in the literature package along with your owner's manual so you may want to check with your Sears Store to be sure you received the correct packet for your model.

If you check the online owner's manual at Manage My Home you can see information on the Safety Key and how it works. The Safety Key has a string on it which is designed to attach to you during a workout so that if you fall, or leave the treadmill for some reason, the key will be pulled out and shut off the walk belt.

Typically the key will not fit completely into the console as it is intended to have the string on it and easily pull out in case of an emergency. In fact, most newer models just attach to the outside of the treadmill with a magnet. If your key is broken off inside the console then the treadmill should work normally but, in that case, it should come out fairly easily and I would still recommend replacing the key as it is an important safety feature.

If your Sears Store does not have the correct safety key for some reason they can order it for you, or you can order it directly through Sears Parts online.

For this model use the current part number 06.831. 208603 or the older number of 06.831. 201576.

Read More
expert -
Sears Technician
January 22, 2008

Top Parts