Model #831293200 PROFORM Treadmill

  • Console And Frame
    3 Results
  • Hood/walking Belt
    3 Results
Find part by diagram >

Question and Answers

Q:

I have a proform 765cd treadmill. worked fine yesterday, today the panel lights up but the control buttons dont work and the treadmill is not working. no beeps

A:

I understand that you are having trouble with your Proform treadmill. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina -
March 14, 2013
A:

Problems with the exercise equipment can slow down your routine.   I see Alina provided a very good troubleshooting link with images that can help with checks to your model. 

A few things could cause the problem you are having. I recommend checking the electrical supply to the treadmill first. If it is fine, make sure the power switch is turned on and the circuit breaker on the machine is not tripped. If all of that checks ok, you will need a voltmeter to diagnose the treadmill. It will require you to make live voltage checks.I highly recommend having a technician make these checks unless you are very comfortable doing so.  You can schedule a Sears technician here; Sears Home Services. If the electrical connections prove ok, the controller will most likely need to be replaced.  Please reply if further assistance is needed.  Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
March 15, 2013
See more answers
Q:

treadmill slows down then speeds up

A:

treadmill slows down & speeds back up periodically

Read More
mike734 -
January 08, 2013
A:

Having problems with a treadmill could be a big inconvenience. While you are waiting for an expert to respond, I have attached a helpful link below that may provide information to assist you with your question.

Read More
Yadira B -
January 08, 2013
A:

Thank you for your question.

I am sorry you are having a problem with the treadmill. If the treadmill speeds up and slows down when you are walking on it, I recommend checking the walking belt lubrication. If the belt is dry, the motor control will try to compensate for the drag and often over speeds the unit. To test the walking belt lubrication, do not turn the treadmill motor on. Set the elevation to the highest level. Stand near the front of the walking belt. Push yourself firmly toward the rear of the treadmill. If the belt is properly lubricated the belt will take you to the rear edge of the treadmill to the floor. If you move and stop, the belt needs lubricating. The part number for the belt lubrication kit is 219168. You can buy it at [ Sears parts direct | Sears Parts Direct . The cost is around $4.00. The application instructions should be in the package, but in case they are not here is how to apply the lubrication. Turn the walking belt until the belt seam is along the top of the front roller. Raise the belt on one side in the center of the walking board front to back as high as you can. Apply 1/2 the tube of lubrication to the walking board in a zig zag fashion moving from front to back. Move the belt until the seam comes up on top of the rear roller, lift the belt again, and put the rest of the lubrication on the walking board in the same manner. Turn the treadmill on and walk on the belt for 10-20 minutes. Walk all over the belt to distribute the lubrication evenly on the walking belt and board.

If the belt seems to be fine, the problem could be a motor control or a motor. Both of these parts can be expensive to replace. To be sure, I recommend having a service technician come out and diagnose the problem. you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Please let me know if you need further assistance on the treadmill.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 10, 2013
See more answers
Q:

treadmill operation

A:

Having problems with a treadmill could be a big inconvenience. While you are waiting for an expert to respond, I have attached a helpful link below that may provide information to assist you with your question.

Read More
Yadira B -
January 08, 2013
A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with your treadmill changing speeds. We are here to help. I recommend tighten the belt. The instructions for that is on page 23 of the owners manual. To download the owners manual click here . If that does not solve the problem, I recommend that you use the link Yadira provided. Just click here to view that link. I hope this helps.

If you do not feel comfortable repairing this problem yourself, then you can have it repaired at your home by a Sears Technician. You may visit SearsHomeServices.com and follow the instructions, then click on the red next now button.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Read More
John H -
Sears Technician
January 09, 2013
See more answers

Top Parts