Model #831285282 PROFORM Elliptical

  • Cardio Cross Trainer
    3 Results
Find part by diagram >

Question and Answers

Q:

Proform 700 Rear Flex Bushing (#18 in diagram) 831285282 Proform Proform 700 cardio cross trainer

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Barbara -
July 21, 2013
A:

Thank you for your question. It is very concerning when the part we need is nla. Seems like no one has parts. I believe I have solved this issue for you click here.

If you want to see our new treadmills vist: www.Sears.com

Please reply to this post if you have anymore questions.

Thank you for choosing manage my life.

Read More
dtova00 -
Sears Technician
July 22, 2013
See more answers
Q:

ProForm 700 Elyptical Machine repair

A:

There is nothing that can't be accomplished with a little help from the experts. To get the best possible answer please provide the model number by clicking on reply to continue the link. when you get the model number you may find the parts in the link provided below. Expert response is two business days.

Read More
Anna T -
August 22, 2012
A:

Model # 831.28528.2 2776

Read More
Heather -
August 23, 2012
A:

Thank you for your question as to whether the unit can be repaired.

I think you did a very good job of explaining the problem.

You sent some great pictures.

If you remove the two screws on the round cover you will be able to see the parts that will need to be replaced.

If you have more questions please reply with the model number off the model serial tag and then I can give find the replacement parts you need.

It certainly can be fixed.

Sam A.

Read More
Sam A -
Sears Technician
August 24, 2012
See more answers
Q:

Replacing a broken right crank arm on Proform model 831.285282.

A:

Sears does not have a phone number for contacting a technician.

These crank arms are hard to remove. Spray some rust buster into the crank arm so it penetrates around the tapered end of the shaft it mounts on. Pull on the outside of the pulley on the right side then the left side so the pulley will sort of rock on the shaft. You have to pull hard to cause the crank arm to break loose from the shaft.

You can schedule service on the eliptical and when the technician calls to confirm his time of arrival, ask him for any suggestions.

Read More
Jimmy K -
Sears Technician
January 15, 2010

Top Parts