Model #83126 CENTURY Welder

  • Mig Welder Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

I need to know how to install a vertical window kit for a

A:

Making sure that you're installing the a.c unit in the window is always a great idea.  While you are waiting for an expert to respond I was able to locate the owner's manual it could possibly assist you with your issue.  I have added the link. Click here to view.  Hope this helps!

Read More
Yadira B -
July 24, 2013
A:

I have the manual. This is new out of the box. There are no instructions for hooking the window panels together. I solved it on my own with twist seals. I believe customers should also be told they should install some sort of security device on slider windows that require a vertical installation. I plan on using a thick dowel, cut to the proper length placed in the wndow frame.

Read More
Karen -
July 24, 2013
A:

Thank you for your question. I did some research and I found the instructions in your manual on page 19. Click here to download your manual.

For all your part needs go to www.SearsPartsDirect.com

If you have anymore questions please reply to this post.

Thank you for choosing manage My Life.

Read More
dtova00 -
Sears Technician
July 25, 2013
See more answers
Q:

Air Conditioner Operation

A:

I can definitely understand your concern over your new AC not working as it should. While you are waiting for your expert answer, I did some research on the unit. At this time, I was unable to locate information that would be helpful in regards to your question. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner.

Read More
Julio -
June 28, 2013
A:

Thank you for choosing ManageMyLife.com. I'm sorry to hear about the issues you're experiencing with the Kenmore air conditioner. I know how frustrating it is to have your air conditioner shut off periodically, especially when it's hot.

Based upon the issue your experiencing, I'm curious to know if you're seeing an error code, possibly H8? When the temperature and humidity is high, the air conditioner may not be able to evaporate all of the water as quickly as needed. All moisture accumulated that is not able to be evaporated is placed in a water tank inside the unit. When the tank is completely full, an alarm will sound, the compressor will shut off, and the bucket full icon will light up on the control panel, and will show an H8 error code.

To empty the tank, follow the instructions below:

  1. Turn the unit off and unplug from the electrical outlet.
  2. Find a small pan to drain the water.
  3. Remove the pre-installed Drain Cap from the unit. (Located at the back bottom of unit between casters)
  4. Drain the water into the small pan.
  5. Once draining is complete, re-install drain cap.

Once the water is drained, it will release the error and the compressor will come back on and start cooling again. Depending on how much humidity you have, this may need to be done on a regular basis.

Hopefully this will help you and keep the air conditioner blowing cool air during the hot summer. I have also included a troubleshooting guideline from the service manual you could follow and see if the full bucket is the problem. Once again, the display should tell you what the error is and you can compare that to what's in the owner's manual to see the specific issue.

If you have any further questions or inquiries, please don't hesitate to ask. Thank you for using ManageMyLife.com.

Read More
Desirea -
Sears Technician
June 29, 2013
A:

This answer does not address my concern. You have repeated what I was able to learn from the manual. Yes, we get the H8 code when the unit shuts off and we know how to empty it. THE QUESTION IS: Is the unit defective if it's accumulating water so quickly that it shuts down every two hours?

Read More
Tom -
July 04, 2013
A:

Thank you for the response and using ManageMyLife.com

I do apologize if my last response was not clear enough. No, your unit is not defective, the issue is with the humidity in the air, which is moisture. The higher the humidity, the more moisture the unit accumulates, and the more often the bucket will need to be emptied.

I answered your concern with my response as follows from last post:

When the temperature and humidity is high, the air conditioner may not be able to evaporate all of the water as quickly as needed. All moisture accumulated that is not able to be evaporated is placed in a water tank inside the unit. When the tank is completely full, an alarm will sound, the compressor will shut off, and the bucket full icon will light up on the control panel, and will show an H8 error code.

If you have any further questions or inquiries, please don't hesitate to ask. Thank you for using ManageMyLife.com.

Read More
Desirea -
Sears Technician
July 04, 2013
See more answers