Model #831248550 PROFORM Treadmill

  • Walking Belt
    3 Results
  • Hood/motor
    3 Results
  • Base/uprights
    3 Results
  • Console/handrails
    3 Results
Find part by diagram >

Question and Answers

Q:

Display not working properly - model 831.24855.6 831248550 Proform Proform xp trainer 580

Q:

proform xp crosswalk 580 treadmill 831248550 Proform Proform xp trainer 580

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your treadmill and I do understand your frustration. Glad to help out. I'm looking at your model number 831248550 and if you have a volt meter you can check the motor to see if it's failed or not. Unplug the treadmill and remove the motor hood. Take the motor wires (red and black) off at the motor controller board. Then connect the meter to the motor wires so the meter and the motor are connected to each other and set the meter to read DC volts. Now plug in the treadmill and put the safety key in place. Walk on the treadmill and get it up to 3MPH; do this manually (do not press speed up or start). As you start walking the motor will generate electricity and the meter will read it. At 3MPH the meter should read 28VDC. If the voltage reading is less than that at 3MPH then the motor has failed. If it's 28VDC or more then the motor is fine. Generally if the belt is a problem (like this) it will show up on the walking deck. Lift the belt on the side and put your hand on the walking deck. Slide your hand in a side to side manner across the walking deck. If you can feel ridges or unevenness then the walking deck and belt are worn out.


If all of that appears to be good then the controller has failed. 

Read More
Sherman_G_Wallace -
Sears Technician
September 23, 2014
Q:

Treadmill proform xp 580 model # 831248550

A:

A broken treadmill will get you off the exercise routine. While you wait for the expert, if you have not had a chance to check the owner's manual I attached in the first link below. If you decide on repair, an option is the Sears Home Services link below.

Read More
Barbara H. -
August 28, 2011
A:

I think the only way to release it (with a broke knob) will be to remove the screws on either end of the latch assembly. Have someone hold the walking deck (so there is no down weight) while you remove the nut/bolt, then you should be able to lower the walking deck down. It looks like the whole latch assembly has to be replaced to get the knob as it does not come by itself. The latch assembly is part number 252837 and is available HERE .

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
August 30, 2011
See more answers

Top Parts