Model #831216520 PROFORM Cycle

  • Bike
    3 Results
Find part by diagram >

Question and Answers

Q:

No extra tension when peddling 831216520 Proform Proform xp 110 r

Q:

when is MML day?

A:

It's great that you want to fix your exercise bike yourself. While you are waiting for an expert to respond, I have attached the link below for your manual.

Read More
Yadira B -
February 08, 2013
A:

I see that Yadira B. posted a link for the owner's manual for that bike in the above response. Here is another version of that manual that may be easier to open and navigate: Proform Exercise Bike XP 110R Owner's Manual. You can use the assembly information in that manual to remove the pedals. Once you remove the pedals, you can pull off the shields on each side by removing the screws. Page 23 of the manual shows an exploded parts drawing. You can order parts from this page: Proform Exercise Bike XP 110R Model 831.216520 Parts

If you need more help, reply with additional details and we will assist you further.

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services. 

Read More
Lyle W -
Sears Technician
July 17, 2013
A:

I could not see how to remove the screws in order to remove the shields. What kind of tool do I need?

Read More
hobsrhino -
February 08, 2013
A:

I have the parts diagram but I cannot see the type of head that those screws have. You may need to use an allen wrench or a screw driver to remove those screws. Look at the head to determine the type that it has. If you still cannot determine which tool that you need, reply with a photograph of the screw head and we will assist you further.

Read More
Lyle W -
Sears Technician
February 08, 2013
A:

I got the shields off, but I am still unable to see what is causing the problem. It sounds like something's cracking when I pedal. Any other ideas short of spending more than the machine is worth to pay someone to come out from Sears Home Services?

Read More
hobsrhino -
February 11, 2013
A:

Although a Sears Technician would likely be able to fix the problem, that solution may not be economically feasible. The technician will normally charge about $150 for the repair trip and the labor. The parts are not included in that labor and trip charge. If you are not able to find the cause of the problem and fix it yourself, I recommend that you consider replacing the bike.

Read More
Lyle W -
Sears Technician
February 11, 2013
A:

Any thoughts on what the likely problem is, or what further disassembly I might try, before calling for a technician service call, based on my description of the problem?

Read More
hobsrhino -
February 11, 2013
A:

I recommend that you slowly rotate the pedals and see if you can determine where the noise is coming from. You can check the pulley that the pedals are attached to for play. Check the eddy mechanism and the idler. This may help you determine the cause of the problem. It is difficult to anticipate the cause without seeing and hearing the bike. Once you determine the cause of the noise, you may be able to fix the problem.

Read More
Lyle W -
Sears Technician
February 12, 2013
A:

Don't know what the eddy mechanism or the idler are. I do have the manual.

Read More
hobsrhino -
February 12, 2013
A:

The eddy is Key 22 and the idler is Key 55 on the parts drawing shown below. That drawing is also in your owner's manual (page 23). The Parts List is on page 22 of the manual.

Read More
Lyle W -
Sears Technician
February 12, 2013
See more answers
Q:

How to replace a drive belt for Pro Form XP 110R bike exerciser

A:

With the new year and new goals, I can see how important it is for you to have your exercise equipment working properly. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. I hope this link provided assist you.

Read More
Jackie S -
January 08, 2012
A:

Thank you for your question.

I will be happy to assistance with replacing the belt. I have posted an image below that I will be referring to in the instructions. Just click on the image to enlarge it.

First, remove both foot pedals. The pedals are marked red. Next, remove the side covers that are secured with the screws marked in blue. Once the covers are removed, you can walk the belt off the pulleys to take the tension off. Then loosen the nuts on the axle that are marked in green. Once it is loose, slide the flywheel out of the frame, and take the belt off. Install the belt in the reverse order. Before tighten the axle nuts check the belt tension. If it is loose, you can tighten key number 60. Once the belt is tight, tighten the axle nuts and reassemble the bike.

I hope this is helpful. Please let me know if you need further assistance.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 10, 2012
See more answers

Top Parts