Model #831216110 WESLO Cycle

  • Cycle
    3 Results
Find part by diagram >

Question and Answers

Q:

How to adjust the pedals because they move too fast on Weslo bike Pursuit 360R, #831216110.

A:

I found the owners manuals to the Weslo Bike Pursuit which should have a page with instructions on how to adjust the pedal. While your waiting on an expert answer, I'm attaching the link below, I hope this helps!!!

Read More
Raquel F -
October 11, 2010
A:

I have attached a photo from the manual on how to increase the resistance on your machine. If you are turning the knob as directed and the resistance is not increasing, there is a problem in the machine and you will need to have a technician come take a look at it. It's a fairly basic resistance mechanism on this machine, but it takes quite a bit to get to it and to get it adjusted correctly.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
October 12, 2010
See more answers
Q:

How can I troubleshoot the Weslo Pursuit 360R/exercise bike console/display?

A:

If the reed switch fails the pace guide will give false readings or no readings. The reed switch is a normally open switch that closes when it is near a magnet. The magnet draws the reeds together causing them to make the switch. You can connect the two wires from the reed switch to the test probes on an ohm meter and pass a magnet by the reed switch. The contacts will open and close as the magnet passes by.

Your problem is in the console. You need to replace the console.

Read More
Jimmy K -
Sears Technician

Top Parts