Model #831215221 PROFORM Cycle

  • Console/frame/flywheel
    3 Results
  • Backrest/sideshield/seat
    3 Results
Find part by diagram >

Question and Answers

Q:

pro- form xp90 831215221 Proform Proform xp90

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question a part for your Proform exercise cycle model XP90. I am so sorry the seat carriage assembly needs to be replaced. I will be happy to help you with this.

The part number for the seat carriage assembly is 229724. I have included the link below for you to order the part.

SAFETY WARNING: Disconnect the power supply before beginning your repair to prevent the risk of electrical shock which can result in property damage, serious personal injury or even death. If you are not comfortable completing this repair, you can set up service at www.SearsHomeServices.com or by calling 1-800-469-4663 (1-800-4MY-HOME). 

I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
February 10, 2015
Q:

Fan stopped working 831215221 Proform Proform xp90

A:

Thank you for choosing SearsPartsDirect.com. I will be more then happy to assist you. Looking at the information on the perform cycle,  im not showing that fan as one peace. Im showing that the whole console needs to be replaced. Unfortunately the whole console is no longer available from the manufacturers. I apology's for the inconvenience. Any further questions or concerns. You will have to post a new question because at this time I can not reply to any comments. Again, Thank you for choosing SearsPartsDirect.com.
 

Read More
Samantha A -
Sears Technician
June 18, 2014
Q:

Pro-Form XP 90 resistance motor test 831.21522.1

A:

Thank you for choosing Sears Parts Direct. I can certainly understand how frustrating it can be when you are not able to use your Pro-Form the way you want to. I did look into the question you have provided and I have found information that will assist you.
To test the voltages to and from the console and boards the treadmill has to be in calibration. Don't stand on the walking belt because you might move a wire causing the treadmill to start turning. The console will beep while it is in calibration, let it beep, it won't damage it. 
Read the voltage to the console between the red and either black wire, it has to read between 8-12 volts dc. Between both black and the blue wire you should read 1-5 volts dc. If you don't have the 8-12 volts between black and red, the power supply board is bad. If you have the 8-12 volts and not the 1-5 between blue and black the console is bad.

If you have the voltage coming from and going into the console remove the hood covering the motor and front roller of the treadmill and read between black and blue at the connector going into the power board. It should be 1-5 just as it was at the console. If you don't have this voltage the wire harness between the power board and the console is bad.

If you have the correct voltage at blue and black coming into the power supply board go to the motor controller board and check the voltage at L, W, and H on the controller. If you have the voltage between L and H but not between W and L the power supply board is bad. If you don't have voltage between L and H the controller is bad. 

If these steps do not work I recommend having a technician come out to test the unit.

Thank you for your question. Have a great day.
 

Read More
Natasha12 -
Sears Technician
January 15, 2014

Top Parts