Model #831159730 WEIDER Weight System

  • Frame Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

looking for manual

A:

Owner's manuals are so helpful for exercise equipment. I was able to locate the manual needed here at Manage My Life and attached to the link below. You can view online, print or save to your computer. Anytime it is needed in future just add the model number to the Manuals tab above in the search box for access. Hope this helps.

Read More
Barbara H. -
August 19, 2011
A:

You can CLICK HERE to view the manual for your machine. If you have any further questions with it please stop by and let me know.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
August 22, 2011
See more answers
Q:

What part do I order to fix the low pulley cable on the Weider Pro 9940?

A:

Definitely having to do repairs yourself can be a challenge to help in determining if you have the right part I would suggest visiting Sears parts direct.com where you can view a diagram of all parts still available for your model. I have attached a link below. Hope it helps!

Read More
Priscilla V -
June 20, 2011
A:

Thanks! I was able to get my question answered by looking at the diagram.

Read More
Karen -
June 20, 2011
A:

I show the cable (pt. 179212) held onto the "leg lever" with screw (pt 105329), nut (pt 133945), and washers (pt. STD551037). The piece may very well have come welded, but there should be a hole there that goes through the square tube that is the leg lever.

The end of the cable will have a metal piece on the end of it with a hole to accommodate the screw. If that metal piece on the cable end broke then all you need to do is order a new cable.

Any needed parts may be ordered HERE .

If you have any further questions please let me know.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
June 21, 2011
See more answers
Q:

I just purchased a Weiderpro 9940. The pulley's don't seem to operate smoothly, and the weight doesn't retract down into the stand. Do I need to Lubricate it?

A:

Resistance of this kind is not what you are looking for in the exercise routine. I found a similar question with what looks like the answer you are seeking. You can check it out if you like. I attached the link below.

Read More
Barbara H. -
February 03, 2011
A:

Check the pulley's to make sure they are all able to move freely. There should be practically no resistance to spin any of the pulleys. There is not anything that should need any type of lubrication as far as the cable system goes.

You may also want to go to our "manuals" section on the website to check out the owner's manual. On page 26 of the manual the adjustable pulley's are discussed. Those adjustments are more for cable tension, but that could also be part of what is going on with yours. I would suspect a pulley is freezing up though.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
February 05, 2011
See more answers

Top Parts