Model #8309 KENMORE Air Cleaner

  • Functional Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

got and hair dryer

A:

That may be a tough question to answer for a hair dryer. A full serial number may be helpful. I will forward your question to an expert who will investigate the matter further and get back to you. You will hear from them within two business days if not sooner. Until you hear from us, have a nice day.

Read More
Henry -
May 23, 2013
A:

Thanks for contacting ManageMyLife.com. I know how important it is to have information on your items. With the model number provided I wasn't able to locate any information on the hair dryer. Generally for smaller items, very little information is available. When doing some research online the only information I located was that it's considered vintage. Sorry for any inconvenience.
 
Please feel free to let me know if you need further assistance.
 
Thank you for using ManageMyLife.com.

Read More
Jonathan B -
Sears Technician
May 23, 2013
See more answers
Q:

my dishwasher is only 1 year old and is not pumping all the water out. Is there any troubleshooting we can do.

A:

Having a Dishwasher that is not working the way it should can be quite frustrating. I have taken the time to research on the Manage My Life website and have found some information you may find useful. While you are waiting for an expert to reply I have attached a few links below. Hope the information provided is useful.

Read More
Priscilla V -
January 20, 2011
A:

Thank you for your question and I understand your concern. If you allow the dishwasher to sit for a some length of time before initially opening the door and then notice some water sitting in the bottom, could be caused by the water inlet valve not fully shutting off allowing water to slowly seep into the tub or it could be a partial restriction in the drain pump, drain hose or where the drain hose connects under the sink.

The first thing I would try is to start the dishwasher with out any dishes or detergent. Let it fill with water and then press the Cancel/Drain button and let the drain cycle time out and then see if any water is left. While draining you should be able to hear it draining with some force. If does not drain all the water then I would disconnect the drain hose from under the sink and then place the end of the drain hose in a bucket. Start the dishwasher again, let it complete the fill cycle and then press Cancel/Drain and check to see what type of water pressure and force is being pump out the end of the drain hose. If water is barely being pump out, the restriction could be in the drain pump, chopper assembly or drain hose.

I added an image below that will assist you understanding the drain operation and how to access the chopper and sump area.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
January 21, 2011
See more answers