Model #8211 PEERLESS Faucet

  • Single Handle Washerless Kitchen Faucets
    3 Results
Find part by diagram >

Question and Answers

Q:

Dishwasher Leaking (Air inlet??) 46513343600 Kenmore Elite Kenmore dishwasher

Q:

My dishwasher does not go from cleaning to the drying SHX46B05UC14FD8211 Bosch Dishwasher

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dishwasher. Upon researching model SHX46B05UC14FD8211; it sounds like you may need to replace the control board. The control board governs the cycles of the unit so when it fails it can cause the dishwasher to not go thru all of the cycles it’s supposed to complete. I have posted a link of the control board to view the link click here.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
March 05, 2015
Q:

Bosch Control Module 481304 switches WFL 2060 UC/1 FD8211

A:

I'm answering my own question but now have another question. I adjusted the switches to match the settings on the original control board with a jewelers magnifyer and tiny screwdriver. After reinstalling all the buttons and the board seem to work fine BUT this is a re-replacement board from Sears, the first one i installed didn't have paperwork teling me that the switches needed to be set first or "CAUTION If settings aren't done correctly washers can eventually be damaged". so i installed that board without changing switches but there were other issues with it. Long story short with the new board the drum will not turn not there is just a buzzing sound. I'm confident that the motor is good, what should i look into first.

Read More
ric -
December 07, 2014
A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your washer. Upon research model number WFL2060UC; there is not a special tool required. Usually if a special tool is required the instructions will state it. If the instructions indicate to adjust them then it would be best to do so.

Thank you for choosing Sears. We appreciate your business. Have a great day.    

.    

Read More
Jeff Wallace Jr -
Sears Technician
December 09, 2014
See more answers