Model #820 PORTER CABLE Drill Driver

  • Drill
    3 Results
Find part by diagram >

Question and Answers

Q:

Washer WONT SPIN. GE Washer model #WHDSE820C1WW WHDSE820C1WW Ge Washer

Q:

820e elliptical manual 820E Horizon Elliptical

A:

Thank you for your question to SearsPartsDirect.com and for being a valued member.

I apologize that you are having a problem locating a copy of the owners manual for your 820E Horizon Elliptical. I have located a free download of the Owers Manual for your 820E Horizon Elliptical.

Click Here

 

Thank you for choosing SearsPartsDirect.com. We appreciate your business. Have a great day!

Read More
Ashley 22 -
Sears Technician
February 24, 2015
Q:

Timer switch hums before turning start switch, but drum doesn't turn Kenmore dryer model 417 820 42201

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your washer. Upon researching model 41782042201; the belt could be stretched. The motor could be losing power and not have enough to start turning the drum.

Thank you for choosing Sears. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
November 06, 2014
A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your washer. Upon researching model 41782042201; the belt could be stretched. The motor could be losing power and not have enough to start turning the drum.

Thank you for choosing Sears. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
November 06, 2014
A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your washer. Upon researching model 41782042201; the belt could be stretched. The motor could be losing power and not have enough to start turning the drum.

Thank you for choosing Sears. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
November 06, 2014
A:

You may be right on either or both the belt and motor, but isn't that getting ahead of ourselves? Isn't the start switch intended to give a jolt to the motor to overcome the drum inertia? And, if there is already power going to the timer switch, hasn't this surge already been dissipated? I noticed that other models have capacitors to provide this surge, but this model doesn't seem to have one unless it's integral to some other component. The belt seems to be tight and the motor is an expensive item to give up on if the problem is in the wiring.

Read More
Richard -
November 06, 2014
See more answers