Model #80110 KENMORE Air-conditioner/heat pump(outside unit)

  • Non-functional Replacement Parts
    3 Results
  • Control Box
    3 Results
  • Blower Assembly
    3 Results
  • Evaporator
    3 Results
  • Compressor
    3 Results
  • Accordion
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore washer will not spin

A:

I understand that your Kenmore washer will not spin. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina -
March 22, 2013
A:

Thank you for submitting your question. I understand your concern and I will be happy to assist you. Alina has provided you with good information regarding the motor coupling. The image below will assist you with removing the washer cabinet for your washer to access the motor and the coupling. The second image will assist you with replacing the coupling itself. Use a screwdriver to pry off the rest of the old coupler. Then tap the new coupler onto the shafts with a deep well socket and a hammer. The parts of the coupler should be flush with the end of the shafts. Then reassemble the washer in the reverse order. I hope this helps. Please reply back to this thread if you require further assistance. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
March 23, 2013
See more answers
Q:

Lightning struck near my house this morning, and now neither of my garage door openers will work. All they do is "click" when I push the buttons. What's up?

A:

I'm sorry that you are having some difficulties with your Craftsman Garage Door Openers. I did a little research for you at Managemylife.com and found an excellent article with multiple expert answers at the bootom of the web page answering many common inquiries. I hope this will help until your expert can respond to your specific question. The link is attached below. If you decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com.

Read More
James -
July 29, 2011
A:

Most likely the boards took a hit on the openers. I cannot tell you how often we see this sort of thing with lightning and garage door openers. The clicking you hear is most likely the relay on the board trying to trigger and the contact is melted from the lightning and not able to make the contact.

You can replace the logic boards by going HERE with the model number. Or you way consider replacing the openers. I'm not sure what you paid for them but a new logic board will typically run anywhere from $80-110 .

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
July 30, 2011
A:

I would pull the logic boards and look for missing or burnt traces on the printed circuit.

Read More
Don -
July 30, 2011
See more answers