Model #8000 BLACK & DECKER Walk Behind Lawnmower, Electric

  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Genie Excelerator garage door opener model# H8000-07, Serial # WK 20, YR 07, P 4, I 01

A:

Hello,

I would like to assist you with your garage door opener question. From the description, it appears that the door safety sensors may not be aligned. Here is a link to the owner's manual. starting on page 26 there is a troubleshooting guide. Verify the status of the safety sensor lights first, this can tell you a lot.

Please reply with your findings if you would like further assistance.

Jerry C

Read More
Jerry C -
Sears Technician
November 16, 2012
A:

Jerry C: You're right, of course, and I'm a bit embarrassed that I didnt check the troubleshooting guide first; it's spelled out there very plainly! Fact is, the problem cleared up "spontaneously" right after I filed my first communication. I was still thinking a loose wire until, at your suggestion, I found it in the manual. Thanks

Read More
G E -
November 17, 2012
A:

Hello G E,

I'm happy to hear that you have it taken care of. It really makes a difference when we run into a problem with a device that we do not regularly service or inspect. That is completely normal, don't be embarrassed. I commend you for reaching out for assistance; many people do not and the outcome is not as favorable as yours. ;)

Thank you for using managemylife.com Please come back with your future needs!

Jerry C

Read More
Jerry C -
Sears Technician
November 19, 2012
A:

I had a power surge that knock out my garage door opener it has power gong to it but Im not sure if I should replace the Pcb,motorPart #: 36428R, or the logic board Part #: 34019R can you give me some insite as to which my fix this problem. because I had a sears tech come out yesterday and he was to busy trying to sell me a new unit.. on a rental property bad idea ..

Read More
James -
January 13, 2016
A:

I had a power surge that knock out my garage door opener it has power gong to it but Im not sure if I should replace the Pcb,motorPart #: 36428R, or the logic board Part #: 34019R can you give me some insite as to which my fix this problem. because I had a sears tech come out yesterday and he was to busy trying to sell me a new unit.. on a rental property bad idea ..

Read More
James -
January 13, 2016
See more answers
Q:

Maytag Neptune Dryer MCE8000AYW with Upper and Lower Drying Cabinets MCE8000AYW Maytag Maytag laundry

A:

I sent you some information that will help you disassemble and diagnose the dryer. If you need more help, let us know.

Thanks for choosing Sears PartsDirect.

Read More
Lyle W -
Sears Technician
November 18, 2014
A:

I sent you some information that will help you disassemble and diagnose the dryer. If you need more help, let us know.

Thanks for choosing Sears PartsDirect.

Read More
Lyle W -
Sears Technician
November 18, 2014
A:

I have the same issue with my bottom dryer. Could you send me the same information please?

Read More
Dan -
November 02, 2015
See more answers
Q:

how do I remove the cabinet front and sides on my Maytag Neptune model MCG8000AWW gas dryer, is this the only way to access the thermostats valve, etc?

A:

I can definitely understand your concern when it comes to your Maytag dryer, while you are waiting for the experts response I have provided you below a couple links that may be helpful to you . Hope it helps!

Read More
Maira E -
October 02, 2010
A:

Thank you for your question. Repairing the Maytag dyer cabinet is not the easiest appliance to repair. I hope the instructions I have added below will help you open up the dryer. Please remember to unplug the dryer before attempting any repairs. If you need instructions for a certain area, I should be able to help you. Please reply below with more details.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
October 03, 2010
A:

are these instructions for the 2 cabinet Neptune drying center? Do I need to remove the upper cabinet front and sides first? Thanks for the help

Read More
mebob45 -
October 03, 2010
A:

I also think I need to replace the thermal fuse and you cannot get to it without either removing the drum or the top mounted cabinet

Read More
michael -
September 28, 2015
See more answers

Top Parts