Model #79692198900 KENMORE ELITE Residential Dryer

  • Control Panel And Plate Assembly Parts
    3 Results
  • Panel And Guide Assembly Parts
    3 Results
  • Cabinet And Door Assembly Parts
    3 Results
  • Drum And Motor Parts Gas
    3 Results
Find part by diagram >

Question and Answers

Q:

how to replace drum of model #796.92198900? 79692198900 Kenmore Elite Dryer

A:

how to rplace the belt of kenmore elite model # 79692198900?

Read More
alfonso -
September 28, 2014
A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your dryer and I do understand your frustration. Glad to help out. I'm looking at your model number 79692198900 and here is link for a video that will help with the drum replacement. The repair is fairly. I recommend taking photos before disassembling the unit. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
October 01, 2014
See more answers
Q:

Sears Elite Front Loader Lint Screen 786-92198900

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina -
February 02, 2013
A:

Thanks for the inquiry about your dryer model 796.92198900; sorry you are having this issue.

Based on the description of the clothes hanging on the filter I recommend that the following parts be changed. This parts replacement has been the solution, to solve the problem you are having. If the filter is damaged you should replace it also.If your dryer is still in warranty you should cal 1-800-469-4663

Guide Cover and filter guide

Always disconnect power supply before servicing the appliance and be cautious of any sharp metals while accessing components

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Ron H.

Read More
Ron H -
Sears Technician
February 04, 2013
See more answers
Q:

LG LP Conversion Kit 383EEL3002A vs 383EEL3002D?

A:

I know how important it is to purchase the correct kit for your appliance so that it will fit just right. While you are waiting for an expert answer, I did manage to find a link in where you can enter your model number and a parts list diagram will pop up in where you can also find the right kit for your appliance. I hope my link is useful.

Read More
Joseph P. -
January 20, 2011
A:

how do you get the broiler drawer off the stove to get to the gas regulator to convert to lp

Read More
Tracey -
January 20, 2011
A:

According to your details, the full Kenmore model number of your dryer should be 796.90441900. I looked at the manual for that model of Kenmore dryer. It indicates that you need LP conversion kit part number 4948EL4002B. There are 2 parts that come up in the Sears PartsDirect.com system when searching that number. You should need the lower priced part ($16.79). Here is a direct link for that part: Orifice (Propane gas) . I provided the procedure for converting the gas valve assembly in the image below. You should just need the orifice and not a "kit". NOTE: A qualified installer should convert the dryer to LP gas. Check with your local LP gas supplier if you do not already have an installer arranged.

I hope that this information helps. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
January 21, 2011
A:

For Tracey: The LP conversion kit in this thread is for a gas dryer. You must have a range that you are trying to convert to LP gas. The broiler drawer will often have release tabs that need to be pushed to remove the drawer. Look for those in the rails once you pull the drawer all of the way out until it stops. If that does not help, reply with the full model number of your range and we will try to assist you further.

Read More
Lyle W -
Sears Technician
January 21, 2011
A:

Lyle, we just bought a Kenmore Elite Dryer Model #796.79272000. It calls for an lp conversion kit part #383EEL3002D. Will part #4948EL4002B work on this dryer? Also, how do you take the dryer apart to install the part. Thanks for your help

Read More
roberta -
March 06, 2012
A:

That part 4948EL4002B will work for that dryer LP conversion according to the manufacturer. I provided a direct link for that part below this response. I will provide some access information for that dryer in a few minutes.

Read More
Lyle W -
Sears Technician
March 06, 2012
A:

I added some videos below. The first one shows how to remove the front panel on an LG dryer with a front console. Be sure that you have the dryer UNPLUGGED before starting that process. The second image shows the LP conversion process. That conversion should be completed by a qualified installer. The images below show the process for removing the front panel and the drum on an LG dryer with the rear console. It appears that your dryer has that rear console. This information should help the installer access that gas valve assembly and complete that conversion. Let us know if you need more help.

Read More
Lyle W -
Sears Technician
March 06, 2012
A:

Lyle, my husband and I have Kenmore Elite dryer # 796.92198900. It's currently set up for natural gas but we've just moved to a house with electric hook up, so we'll be converting to propane. We've been on the phone with Sears Parts all morning getting transferred to literally 8 different people in 3 different departments! We're trying to find out what orifice we need and if we also need the full conversion kit (we're hoping we only need the orifice). Can you please let us know? Our manual says we need 383EEL3002D but it's very expensive! Thanks a million.

Read More
Sherri -
May 30, 2012
A:

Hello Sherri. I will check with the manufacturer and see if you can use the part 4948EL4002B (orifice) that is much less expensive. I will reply to this thread once I receive an answer (probably at least by tomorrow).

Read More
Lyle W -
Sears Technician
May 30, 2012
A:

Hello again Sherri. I checked with the manufacturer. You can use part 4948EL4002B that is described above. That orifice only costs around $18. Here is a direct link for that part: LP Orifice for Kenmore Dryer 796.92198900 . A qualified installer should convert that dryer. The installer can use the information that I provided above to complete that conversion. If you need more help, let us know.

Read More
Lyle W -
Sears Technician
May 31, 2012
See more answers

Top Parts