Model #79640448900 KENMORE Residential Washers

  • Cabinet And Control Panel Assembly Parts
    3 Results
  • Drum And Tub Assembly Parts
    3 Results
  • Dispenser Assembly Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

LE Error Code from Washer Wire Harness Issue? 79640448900 Kenmore Washer

A:

Thank you for your inquiry on your Kenmore Washer, Model: 796.40448900. I’m so sorry you’re having trouble and will be happy to see what might be causing the issue. On reviewing your model, I have provided an insert from the service manual which should be able to advice you what the error code LE means.  

Safety Warning: Before beginning this repair, disconnect the power supply to the washer to prevent risk of injury from electrical shock.

Caution: internal parts may have sharp edges that may cause serious cuts. Use caution and wear protective gloves if possible.

If you’re not feeling confident/comfortable repairing this problem yourself, you could have it repaired by a sears technician at your home. Here is the link and phone number for our technicians. Sears Home Services or-1-800-469-4663. 

 

I hope this answered your question. Thank you for choosing SearsPartsDirect.com and have yourself a wonderful rest of your day. 

Read More
Gerry 93 -
Sears Technician
June 09, 2015
Q:

washer drum tilts back 79640448900 Kenmore Washer

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

Kenmore Front Loading Washing Machine is having difficulty with water draining

A:

Tina, thank you for the detailed information. Are you getting any kind of an error code? I've located a link that discusses the fact that too much soap can disable the drain pump. This may not be the circumstance you're dealing with but I was trying to find information for a washer that has a cleared pump but still wont drain. Click on the link below to view the page. Though this link discusses a different model number, the mechanics are likely going to be very similar. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this information will be helpful and have a nice day.

Read More
Henry -
August 06, 2013
A:

I know that it can be very difficult to have issues with your washer. There are many external factor that can cause this type of problem. It could be that the drain pump is clogged, which is preventing all the water from draining. Also the drain pump itself has failed and needs to be replaced. The image below will provide some troubleshooting for this. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
August 06, 2013
A:

Is this something a homeowner can do without a technician?

Read More
Tina -
August 06, 2013
A:

Yes, the image shows you how to remove the pump. Just follow the directions in reverse tro install the new one. Please let me know if there is anything else you need. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
August 07, 2013
A:

Hello, Where can we find the manual which shows where the pump impeller is located along w/other internal components listed in the answer?

Read More
Tina -
August 18, 2013
A:

The impeller is inside the drain pump. If the impeller is clogged you can remove the drain pump and clean it out. However, if it is damage or has stopped working, then the pump needs to be replace. None of the internal parts can be replace they are not available for individual sell. Please let me know if there is anything else you need. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
August 19, 2013
See more answers

Top Parts