Model #79579302900 KENMORE Top-Mount Refrigerator

  • Case Parts
    3 Results
  • Freezer Parts
    3 Results
  • Refrigerator Parts
    3 Results
  • Door Parts
    3 Results
  • Ice Maker Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Frig temp

A:

Thank you for your question. I can understand your concern about the fridge section getting warm. This type of problem is usually air flow related. By this I mean the air flow from the freezer to the fridge has been reduced. This can happen if the defrost system fails. Check for a thick frost accumulation on the back panel in the freezer. If this is taking place, it means the defrost system has failed and as the frost builds, the air flow to the fridge will be reduced. In this case, you can turn the unit off for 24 hours and leave the freezer door open, to allow it time to defrost. When it has defrosted, the unit will cool ok again for a few days until the frost builds back up again. This will allow time to have it checked and repaired. I'm listing a site you can access, to have a tech come out. Here is a link for the website: Sears Home Services. I hope this will help you. If you would like more assistance, reply to this thread and I will assist you further.  

Read More
Scott D -
Sears Technician
August 30, 2013
A:

Ice maker not working help

Read More
Crystal -
May 31, 2015
See more answers
Q:

Kenmore 795.79302.900 light isn't always on, contents not cold. 795.79302.900

Q:

My 2009 top freezer isn't working. Do I have to purchase a new appliance? If so I will be upset. 79579302900 Kenmore Refrigerator

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Alina -
April 06, 2013
A:

Thank you for your question. I know it's frustrating when the freezer stops freezing. It will depend on what is causing the problem, to be able to determine, if it's more economical to repair or replace the unit. If the fan motor inside the freezer is running, it will need to be determined, if the compressor is also running. If the compressor is running but no cooling is taking place, it will lead to a problem in the sealed system or with the compressor. If the compressor is not running, check to see if the fan next to it is running. If the fan stops running the compressor will overheat and stop also. If the fan is running the problem could then be with the compressor, the control board or the starting device on the compressor. These are checks a technician will need to make. I'm listing a site you can access, to have a tech come out. Here is a link for the website: Sears Home Services. If you would like more assistance, reply to this thread and I will assist you further.

Read More
Scott D -
Sears Technician
April 08, 2013
See more answers

Top Parts