Model #79578406803 KENMORE Bottom-Mount Refrigerator

  • Case Parts
    3 Results
  • Freezer Parts
    3 Results
  • Refrigerator Parts
    3 Results
  • Door Parts
    3 Results
  • Dispenser Parts
    3 Results
  • Ice Maker Parts
    3 Results
  • Valve And Water Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Refrigerator Dimensions 795.78406.803

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your refrigerator. Upon researching model795.78406.803;  I have posted a link of the refrigerator specifications based on the model number provided.

23 cu.ft, Length: 3F0.5, Width:2F11.0, Height:6F1.2, Weight:308lbs

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
August 10, 2015
Q:

What does Er on freezer and dh on refrigerator temperature panels mean 79578406803 Kenmore Refrigerator

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore refrigerator.

From the information you have provided above, after researching model number 795.78406803. This is a defrost error code. It means that the defrost sensor has not reached a temperature of 46 degrees within one hour after a defrost cycle has started. The most common fix for this, is to replace the controller # 6615JB2005c. This part is located just above the evaporator on the right side. The back panel in the freezer will need to be removed to access this part

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
February 23, 2015
Q:

having trouble with refrigerator. led screen reads, Er on the left side and IF on the right side. I can get water from it but no Ice and no read outs.

A:

Error codes can be an inconvenience and keep your refrigerator from running properly. I did some research and I was able to find a link that will provide you with some good information. I hope this helps with your refrigerator troubles while you wait for your expert response.

Read More
Joseph P. -
September 08, 2012
A:

Er - IF = Failure of fan motor for the ice maker -- there is no fan motor signal for more than 115 sec. May want to schedule service for this one.

Read More
Chat in RI -
September 10, 2012
A:

Thank you for your question. I'm sorry you are having this problem with the fridge. This error code Er IF indicates a problem with the icemaker fan motor but it can also be with the main control board. When the power cord is disconnected for 30 seconds and then reconnected, it resets the board. Sometimes this procedure corrects the problem and sometimes it does, for only a short period of time. Usually in this case, if the problem reoccurs, the main board will need to be replaced. However, first it needs to be determined if the fan motor is running or not. If the motor is still running, then the main board, which is located behind the unit, will probably need to be replaced but it�s possible, this could still be a problem with the motor, not sending a low voltage signal to the board, which would be a defective motor. Now, if the motor is not running, some voltage checks will need to be made, to determine, if the motor has failed or if the board is not sending voltage to the motor. These are some difficult checks to make and the motor can be a difficult repair, which will require a technician. I'm listing a site you can access, to have a technician come out to check it. Here is a link for the website: Sears Home Services . I hope this will help you.

Read More
Scott D -
Sears Technician
September 10, 2012
See more answers

Top Parts