Model #79575283401 KENMORE Bottom-Mount Refrigerator

  • Case Parts
    3 Results
  • Refrigerator Parts
    3 Results
  • Freezer Parts
    3 Results
  • Door Parts
    3 Results
  • Icemaker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

evaporative motor 79575283401 Kenmore Bottom-mount

A:

Thank you for choosing SearsPartsDirect.com. Thank you for your question. I know how important getting the correct parts is. I see her that your evaporative motor is going to be part number 4680JK1002B. I also recommend also replacing the motor fan assembly wich is part number 5901JJ1004B. When you open the freezer, there will be a back panel you need to remove in order to access your motor. I hope this helps you. Have a great day!

Read More
Samantha A -
Sears Technician
March 27, 2014
Q:

I want to drill a hole in the back of my kenmore refrig. Model 795.75283401. There are two punch outs. Is it safe to drill?

A:

Good afternoon.... I applaud you're being prudent by asking this smart question. If you survey the area and it is clear of electrical wiring and it's not used as a special support, I can't see why not.... But I would also encourage you to wait for an expert response before you take any further action. They should be in touch with you within the next two business days if not sooner. I hope this helps resolve your drilling question and have a nice week end.

Read More
Henry -
November 23, 2012
A:

Thank you for your question. I would not recommend drilling any holes in the cabinet. Usually the only punch outs in a cabinet will be where the water tube would enter the cabinet. This type of punch out would be there only if there was no icemaker in the unit and it was able to have an add on icemaker installed. I hope this will help you.

Read More
Scott D -
Sears Technician
November 26, 2012
See more answers
Q:

Drawers in refrigerator freeze no matter what the settings are.

A:

I have experienced the same problem you have with your refrigerator and it's really frustrating. I researched your question an found someone asked a question similar to yours. Here is what was posted by an expert, I have provided the link below. I hope this helps!

Read More
Jacqueline S -
August 15, 2010
A:

The information you have already received is correct. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
August 16, 2010
See more answers

Top Parts