Model #79575199400 KENMORE ELITE Bottom-Mount Refrigerator

  • Case Parts
    3 Results
  • Freezer Parts
    3 Results
  • Refrierator Parts
    3 Results
  • Door Parts
    3 Results
  • Dispener Parts
    3 Results
  • Ice/maker Parts
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Have kenmore elite fridge, Model # 795.75199400. Lamp Cover kept falling off. Ordered new lamp cover, received substitute part, does not fit, it is bit big

A:

I understand how frustrating this can be especially after receiving a substituted one. While you are waiting on an expert to answer your question, I suggest you visit Sears Parts Direct website to speak with a Sears associate to find out what part is needed. I have attached the link below. Have a nice day!

Read More
Dezeray -
July 25, 2012
A:

I called the manufacturer. There is one other lamp cover listed for the refrigerator that may work in your model. That is part 3550JJ1104A. That lamp cover is shown in the image below on a 1" grid. I recommend that you compare your original lamp cover to the one shown be to see if that part 3550JJ1104A will work. If it will, then you can order that part from this page: Kenmore Elite Refrigerator Model 795.75199400 Lamp Lens Cover .

If that lamp cover shown below is not the correct size, I recommend that you reply with the dimensions of your original lamp cover and we will research that part further.

Read More
Lyle W -
Sears Technician
July 26, 2012
See more answers
Q:

I am having difficulties installing a filter replacement on my Kenmore Elite refrigerator. I have done this in the past but this new filter is not going into t

A:

When installing parts on an appliance can be very difficult. A suggestion I have while you are waiting on an expert to answer your question. I found your owners installation guide. I attached the link below for you to check out. Hope this helps! Good luck.

Read More
Dezeray S -
October 09, 2010
A:

It seems sometimes the filters, can be difficult to replace. The filter you have is correct but it has now been substituted to # CLS30320001. Based on the information listed, it would seem that the filter head assembly may need to be replaced, if the old filter, will not fit back either. However, usually applying more force to install the filter generally works. There is no other way to install the filter. The tiny particles you see will probably be mineral deposits that are in the water, which is normal. Now, if you cannot get the old filter to fit back, before replacing the filter head assembly # 5231JA2005A, I recommend having a technician check it. I'm listing a site you can access, to have a tech come out. Here is a link for the website: Sears Home Services . If you would like more assistance, additional details will be helpful.

Read More
Scott D -
Sears Technician
October 11, 2010
See more answers
Q:

How do I replace the water tank on my Trio Elite #79575199400?

A:

The water tank will be located in the bottom of the left side refrigerator door. You will see 2 caps in the cover that will need to be removed. Behind these caps are some screws that need to be removed and then you will be able to remove the cover and access the water tank. I'm sending you pictures and instructions to access the tank. I'm also sending you some pictures with instructions of how this type of fitting works. I hope this will help you. If you need more assistance, you can resubmit your question with more details.

Read More
Scott D -
Sears Technician
December 08, 2009

Top Parts