Model #79568279900 KENMORE Bottom-Mount Refrigerator

  • Case Parts
    3 Results
  • Freezer Parts
    3 Results
  • Refrigerator Parts
    3 Results
  • Door Parts
    3 Results
  • Ice Maker Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

79568279900 - Kenmore Refrigerator compressor seems to be running almost 24/7 795.68279.900

A:

current model ref. run more than older ref. sounds like her's is ok

Read More
Patti7075 -
Sears Technician
November 12, 2015
Q:

Frig light won't come on 79568279900

A:

Thank you for choosing SearsPartsDirect.com. I will be more than happy to assist you. I can understand any frustration you may have experienced with regards to your unit. Let’s see what we can do for you.

It sounds like you need to change out that switch. That switch sounds like the connections have crossed, and isn’t working correct. Replacing that switch should fix your issue.

Hope this information has helped you. If you are not comfortable doing this repair you can click here to schedule a technician or call toll free 1-800-469-4663. Again, thank you for choosing SearsPartsDirect.com.

 

Read More
Samantha A -
Sears Technician
October 31, 2014
Q:

No Refrigerator Light/Beep 79568279900 Kenmore Refrigerator

A:

Thank you for choosing SearsPartsDirect.com.  I can certainly understand how frustrating it can be when your refrigerator is not working properly. I did look into the model number you have provided, and I have found information to assist you.  

It sounds to me like the door switch has gone out causing the lights not to work and the buzzer not to sound.
The proper tests with a multi meter will need to be made in order to determine that is the issue. 

A good check for your door switch will be to pry the switch out and connect the 2 wires together. Be sure to disconnect the power before removing the switch and connecting the wires. Now, reconnect the power and if the lights work when the wires are connected, it indicates the switch # 6600JB1010A has failed and will need to be replaced. 
If the lights still don't work, it could indicate an issue with the socket or the electronic control. In this case, we would recommend having a technician assist with the electrical checks. 
 
Remove door switch:
1.  To remove door switch, pry it out with a slotted type driver.
2. disconnect the lead wire. 
 
If there is a clip on the lead wire then you will need to get a flat head screw driver to push down on the plastic piece to release the tab. 
The harness connector will also be prye off the old switch.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 


Read More
HFederico -
Sears Technician
August 11, 2014

Top Parts