Model #79099913805 KENMORE ELITE Free Standing, Electric

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers


316577079 board replaced start up procurers 79099913805 Kenmore Elite Electric range


Thank you for choosing and being a valued member. I can certainly assist you.

To test oven temperature set the electronic oven control for normal baking at 350°F. Obtain an 
average oven temperature after a minimum of 5 cycles. Press CANCEL or CLEAR to end bake 
mode. If necessary calibrate the oven temperature 
1. While in a non-cooking mode, press and hold the BAKE pad for 6 seconds.
2. The current calibration offset (temperature adjustment) should appear in the temperature 
3. Use the number pads (0-9) to enter the desired amount of adjustment. Temperature can be 
 adjusted in one degree increments (up to 35°F).
4. Press the START pad to increase the oven temperature by the selected amount . Press the 
 FlexClean pad to decrease the oven temperature by the selected amount. A minus sign (-) will 
 appear in front of the display to indicate the temperature is being reduced. A positive adjustment 
 will not display a sign.
5. Once the desired adjustment (-35° to 35° F) has been entered, press the START pad to accept the 
 change or the CLEAR/CANCEL pad to reject the change.
Note: Changing calibration affects all Baking modes. The adjustments made will not change the 
self-cleaning temperature.

You can also visit for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the unit before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
August 18, 2015

I replaced the module discussed and there is no display lighting up. When I touch any of the buttons there is a beep and nothing happens

Read More
Dan Russell -
August 20, 2015
See more answers

7909913805 79099913805 Kenmore Elite Electric range


Thanks for the inquiry and for being a valued member.

I am sorry to hear of the issues you’re having with the range. I know how frustrating that is to have happen.

This error code indicates a hardware issue inside the electronic operating control. Try this; disconnect power to range for 30 seconds, and then reapply power. If the error code comes back immediately then the control would need replacing. If it does not come on there just may have been an interruption in processing. If the control does need replacement, the part number is 316577079.

In regards to the calibration, the only calibration I see for this unit is for the oven temperature. There shouldn’t be any calibration needed for the install of a new board.

I hope this helps and thanks for using We appreciate your business.   

Read More
Jeff Wallace Sr -
Sears Technician
December 28, 2014

The outer two glass panels on my Kenmore Elite Stove model # 790.99913805 shattered. I want to know why? And what will prevent it from happening again.


I completely understand your concern over the glass panels on your stove shattering. While you are waiting for your expert answer, I did some research on the unit. At this time, I was unable to locate information that would be helpful in regards to your question. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner.

Read More
Julio -
July 05, 2013

Thanks for contacting manage my life about your range/oven; sorry you are having a problem, I will be glad to assist you. I have researched you model and find no know issues with the door glass. Possible causes or the glass breaking could be a stress point that can be caused many reasons. The most common causes for the door glass breaking is getting moisture on it while still hot. I understand that it was not in use but a stress issue may have occurred previously. The glass is designed to shatter just like a car window to prevent large shards of glass. I would recommend calling and have a technician inspect your door and oven, often a visual check and inspection can reveal the cause, but sometimes this is a mystery. I hope this helps, if you need more help reply and I will be happy to respond. If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services.Ron H.

Read More
Ron H -
Sears Technician
July 08, 2013
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show