Model #7909641440C KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

Needing the right touch up paint for a chip on the stove 7909641440C Kenmore Electric range

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore range.

From the information you have provided above, upon researching model number 790.9641440c. I have located the information you are ,looking for. The correct touch up paint for you model is 5304414035. The model number given pulls back the color bisque.  

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
January 19, 2015
A:

The touch up paint number 5304414035 shows that it's discontinued. Do you know if there is another part number

Read More
Alan -
January 19, 2015
A:

Unfortunately that was an updated part number for the paint. I don’t show any other part numbers for it. However, if you place the 5304414035 into google.com I did show a few listing still for it off of eBay or amazon. So good thing it’s still out there just not directly from us here at sears. It might be a few bucks more off a third party but you will be able to order and get your issue solved.

Hope this helps out. again thanks for chossing sears we appreciate you business. Have a great day.

Read More
Benny23 -
Sears Technician
January 19, 2015
See more answers
Q:

cantkeepclockshowing 7909641440c Kenmore Electric range

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.

You will need to change the clock setting on page 13 of your Owner's Manual. There is a function that allows you to set your clock to turn on and off in a few mintues. Follow the instructions listed on page 13. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
October 28, 2014
Q:

Element light 7909641440C Kenmore Electric range

A:

Thank You for contacting SearsPartsDirect.com

One of the burners switches has a stuck or welded contact inside the burner switch. Each burner switch has a contact that closes whenever the burner switch is turned ON which causes the surface indicator light to come on. You can diagnose which switch has failed by process of elimination. Each burner switch has a terminal marked with a letter "P" which supplies the voltage to surface indicator light. You can access the burner switches by removing the panel behind the console. NOTE: Disconnect power to the range before removing the rear console panel. Pull the wire off terminal "P" at one switch at a time and then reapplying power to see if the light goes out. If it goes out, replace that switch. If it does not go out, disconnect power to range and reconnect the wire and then pull the wire off the other burner switch connected on terminal "P" and then reapply power. If the indicator light goes stays off, replace that burner switch. NOTE: Disconnect the range from the power source before disconnecting the wire from terminal "P" and then power the range back up. Do these steps to one switch at time until find the bad burner switch.

 If you need further assistance, please let me know. Thanks for visiting SearsPartsDirect.com

 

Read More
Desirea -
Sears Technician
November 03, 2013
A:

Thank you, but I unscrewed the back and there is more than one terminal P on each switch. Some have P and P2 or P1 and P2 do I just connect the one or both?

Read More
Allie -
November 07, 2013
See more answers

Top Parts