Model #7909641340B KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

Trouble getting range self-clean feature to work

A:

I think we all get a little frustrated when an appliance we depend on starts acting up on us. I'm sorry to hear that you are having some issues with your Kenmore electric range. I did some research at Managemylife website and found an expert answer to a similar question that may help until your expert can respond. I have attached the link below so you can check it out. If you are thinking about scheduling service and have a qualified technician assist you, I have also attached the link to SearsHomeServices. I hope the links below will help you out.

Read More
James -
April 27, 2013
A:

The F40 error code indicates a failure of the cook top lockout board. The cook top lockout board is not communicating with the main EOC (electronic oven control). If there is not loose wiring between the cook top lockout control board and electronic oven control (EOC) then the cook top lockout control may need to be replaced or possibly the electronic oven control board.  The electronic circuits will need to be tested to find the root cause. I highly recommend having a technician make the necessary diagnosis and repairs.  You can schedule a Sears technician at Sears Home Services.  Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
April 28, 2013
See more answers
Q:

aluminum foil stuck to bottom of oven

A:

Melted foil in the oven has become common for newer appliances. The expert will review this model to respond, but I attached two similar questions with helpful advice. I hope these links help.

Read More
Barbara H. -
April 15, 2012
A:

You still should be able to use the oven with that foil stuck to the bottom panel. You can also use the self clean feature. The self clean feature will not remove the foil. It will probably adhere it even better to that bottom panel. Since this oven has a removable bottom panel, I recommend that you replace that component. The part number for the bottom panel is 316400601. You can order that part from this page: Bottom Oven Cavity Panel for Kenmore Range 790.9641340B . You should see two thumb screws at the back of that bottom panel. Remove those screws and then pull the bottom panel slightly up and back to clear that front lip. You should then be able to pull that bottom panel out and replace it.

I hope that this information helps. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
April 16, 2012
A:

Lyle, Thanks for your help!

Read More
salbriss -
April 16, 2012
A:

Thanks to all who wrote back...I don't care about the looks, I was just worried that there might be some harmful side effect from having the foil stuck. Thanks again

Read More
JERRY NAVARRA -
November 28, 2012
See more answers
Q:

Kenmore Electric Range Model No. 790.9641340B Parts Question

A:

I understand how it can be frustrating when it comes to locating the proper repair parts for your range. While you are waiting for a detailed reply from an expert I would recommend re visiting the Sears parts direct website were you can view a full parts list and diagram of your model you also may find a direct number to speak with a parts associate in regards to finding the proper part.

Read More
Priscilla V -
June 04, 2012
A:

I already did what you are recommending, but I am not certain if I am looking at the right part. Also the associate could not help me. I need to know if I am buying the right part.

Read More
Indranil -
June 04, 2012
A:

The bottom panel on this model is replaceable. The part number is 316400601 and can be purchased from Sears PartsDirect . This is not a replacement part so, the panel should be the same color and same enamel coating as the inside of the oven.

You should see two thumb screws at the back of that bottom panel. Remove those screws and then pull the bottom panel slightly up and back to clear that front lip. You should then be able to pull that bottom panel out and replace it. I hope this helps.

Read More
Korinna S -
Sears Technician
June 05, 2012
A:

Korinna, I went to the local Sears store and the folks looked at the database (I showed them which panel of the oven from a comparable model was damaged) and told me to order PART NUMBER: 316411104 (Base) which I did. You are indicating a different part. 316400601 is key #8 in the diagram of the body of the oven and seems like the top panel, no? Please respond ASAP. Thanks!

Read More
Indranil -
June 05, 2012
A:

Well corrina, I talked to two specialists at Sears Parts Direct and it seems the local Sears store made me order the wrong part. It should be 316400601 like you indicated. I guess I will have to return this and order the right one when it is available (currently backordered). Sigh!!!!!

Read More
Indranil -
June 05, 2012
See more answers

Top Parts