Model #79096413402 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Oven door Hinges 790.96413402

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your range. Upon researching model790.96413402; if the door is not closing properly you can replace the door hinge. The door hinge is sold separate from the door pieces so if you just need the hinges you can just order the hinge kit#5304445530 I have posted a link of the hinge kit to view the link click here.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
March 01, 2015
Q:

Kenmore Electric Range Model # 790.96413402 Serial # VF 44556392- Oven Door stays open & light stays on...

A:

The oven door needs to be flush to keep the heat in as well as control that light. I can see that this would be something you wish fixed as soon as possible. While you wait for the expert to answer, you can check a similar question from a previous expert post if you like. I attached below. It is not your exact model but I think it may help. I also attached the link for your model at Sears Parts Direct if you wish to check parts for your oven door. Hope this helps!

Read More
Barbara H. -
December 26, 2010
A:

The hinges will probably need to be replaced to fix this problem. You can order a kit (part 5304445530) that has all of the parts that you need. Here is a direct link for that part: Hinge Kit . Barbara H. provided a link for a previous answer that shows an illustrated procedure for this repair. Here is another copy of that link: how to fix the door of electric range that does not close perfect?

Your range may be slightly different than the one shown in that link but the basic repair procedure is the same.

If you need more help, reply with additional details and we will assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
December 28, 2010
See more answers
Q:

why does my stove /oven read F10?

A:

It can be so confusing understanding error codes. I have found a page on my website that can help you out and give you an idea of what exactly it means. I have attached the link below. Hope this helps!

Read More
Alina F. -
October 08, 2010
A:

The F10 code indicates the electronic oven control (EOC) has detected an over temp condition in the oven. This can be caused by an oven temperature sensor or the EOC (electronic oven control).

We can't test the EOC but we can test the oven sensor. To do this turn the power to the range off and remove the panel that covers the controls on the rear.

Disconnect the plug on the EOC that has 2 violet wires in it and read the resistance between the violet wires. It should read between 1000-1200 ohms at room temperature. If the oven sensor checks within this range the EOC is bad.

If the resistance is out of range take the lower panel off the rear of the range and disconnect the violet wires from the plug that goes to the oven sensor. Read the resistance of the sensor. If it is still not within the range the sensor is bad. If it measures within the range the problem is in the wiring from the EOC to the sensor.

Read More
Jimmy K -
Sears Technician
October 08, 2010
See more answers

Top Parts