Model #79096314400 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers


F10 error replaced the EOC still get an F10 error 79096314400


Thank you for choosing sears I would be happy to help you with your range. Upon researching model 79096314400; The F10 error code indicates that the electronic oven control board is detecting a runaway (extremely high) temperature in the oven. If this is happening before the oven even begins heating or is not up to the set temperature, then you could have a failed oven temperature sensor or a failed electronic control board. A wire harness failure could also cause this problem. If the oven heats to an extremely high temperature and then you see this F10. Since the control board did not fix this problem, it sounds like you may need to replace either the temperature probe or the wiring harness. The reading for the temperature probe is should normally be 1100 ohms as you had described, so you can check the wire harness. I recommend checking the resistance through the temperature probe circuit that connects to the control board.

I trust that this information will help you, thank you have a great day.

Read More
CarlosZ -
Sears Technician
January 06, 2015

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show