Model #79096312401 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

I purchased Kenmore stove in 2005. The oven door has never shut properly but it now burns top in inner door while oven cooking. Have tried Model 790.96312401

A:

I understand that you oven door is getting burned on the top and want to adjust the door. I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below for you to view. I hope the link that I provided is helpful.

Read More
Alina F. -
February 20, 2011
A:

You will probably need to replace the oven door hinges to fix this problem. There is a kit that has all of the parts needed for this repair. The kit part number is 5304445529. You can order that kit from the Sears PartsDirect website.

You may be able to replace the hinges yourself. Here is a link for a previous answer that provides the procedure: Why won't the oven door close securely on my Kenmore range?

If you need more help, reply with additional details and we will try to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
February 21, 2011
See more answers
Q:

How do I Remove Glass Top on Kenmore 790.96312401

A:

Having to remove parts on an appliance can be very challenging as well quite the job. I have taken the time to research on the Manage My Life website and found a great link that may be useful for you. If you would like to take the time as you are waiting for your expert to reply I have provided a link below that you may view while you are waiting. Hope this information is useful.

Read More
Priscilla V -
December 16, 2010
A:

Thank you for your question and I understand your concern. I added some images below with the basic instructions on how to raise/remove the top in order to access the elements.

NOTE: Disconnect the power cord from the power source before raising the top.

Read More
Joey S -
Sears Technician
December 17, 2010
See more answers
Q:

The oven door lock light is on but the door is open. I can not get the door lock light off. What can I do to get this fixed Kenmore model 790.96312401

A:

I can see your frustration upon this issue. I did find a similar question being, an expert answered. They gave excellent information, i placed the link down bellow i hope that it helps whole you wait for an expert to answer.

Read More
celene -
August 27, 2010
A:

Open the oven door and have someone manually push in on the light switch. With the oven door light switch pushed in set the control up for a self cleaning cycle & start the cycle. Only let the self cleaning cycle run for about 4-5 minutes & press stop/ cancel. Do not let go of the light switch until the lock motor rotates & resets. You should now be able to close the oven door & the lock light should be off. If the light switch is broken this is the problem & the light switch will need to be replaced. Remember to disconnect power to the range before attempting service.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
biker dave -
Sears Technician
August 28, 2010
See more answers

Top Parts