Model #79096112407 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

I need to change glass top on my range model#79096112407.need diagrams to remove old top and install new one. 79096112407 Kenmore Electric range

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.”

 

Read More
Natasha12 -
Sears Technician
December 05, 2013
Q:

Need to change a glass cook top on my Kenmore range model 790.96112407

A:

When it comes to replacing parts on your appliance owners manuals are the greatest things to have. While you are waiting on an expert to answer your question, I was searching the Manage My Life website and found your owners manual. I have attached the link below. Have a nice day!

Read More
Dezeray -
June 19, 2012
A:

Thank you for your question and I understand your concern.

I added an image below with the instructions for removing the glass top. NOTE: Disconnect the range from the power supply before servicing your range.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
June 20, 2012
A:

I need to replace my glass cook top on my range Model # 79096112407. do you have a diagram you could link me to showing how to remove top and install new one?

Read More
Jeremy -
November 18, 2013
A:

Jeremy: I added an image below with the procedure of removing the top. NOTE: Disconnect the power cord from the power source before servicing. I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
November 18, 2013
See more answers
Q:

Why won't my Kenmore oven element heat up?

A:

I am sorry that the oven is not heating properly and I will be happy to help. I did some research and I was able to find two links that will provide you with some good information. I hope this helps while you wait for your expert response.

Read More
Joseph P. -
April 26, 2012
A:

I recommend that you unplug the range and check the wiring between the clock control board in the console and that bake element. If the wiring is okay, then you will probably need to replace that clock control board since you are not getting voltage out of the control board to the bake element in the bake mode. You can order that part from this page: Range Clock Control for Kenmore Range 790.96112407 . Be sure that you unplug the range before accessing and replacing internal components. Here is a brief repair video that shows how to replace that clock control board: Range Clock Control Replacement . You may also need to order the overlay for that clock control board unless you can reuse the original one as shown in that video.

If you need more help, reply with additional details and we will assist you further.

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
April 27, 2012
A:

Joseph, thanks for your efforts, although those were things I already knew and ranges with different specs than mine, so they didn't really benefit me very much. Lyle, thanks very much. I have 40 years experience as an electrician and a mechanic specializing in automotive electrical issues, just not a lot of experience with newer appliances. But in my experience, on most of these newer types of equipment with the self diagnostics, if they're not functioning and not displaying any code, it's usually a faulty control board. I just didn't want to order a $100+ board, then find out that I overlooked something on the schematic and missed some part in between that caused the trouble. I find I'm smarter to consult the real experts first, than to replace parts and then discover I didn't fix the problem. With the element plugged in and the bake setting on, I'm getting 18.7mV with my meter on the plugs at the element. If I unplug the element, I get a varying reading ranging from 5mV up to 88.4V. The same whether I check at the unplugged wires or at the back of the board, and the continuity through both wires is good. So I suspected it must be the board. Thanks again.

Read More
Fred -
April 29, 2012
A:

Hello Fred. Based on those voltage readings out of that control board, you seem to be correct about your suspicion that the control board is bad. Let us know if you need more help.

Read More
Lyle W -
Sears Technician
April 30, 2012
See more answers

Top Parts