Model #79096019401 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

hot surface light 79096019401 Kenmore Electric range

A:

Thank you for choosing sears I would be happy to help you with your dryer. Upon researching model 11072622100; one of the 4 radiant burners has a faulty hot surface switch. The hot surface switch is part of the radiant burner. This means radiant burner with a faulty hot surface switch will have to be replaced. The cook top will have to be removed in order to access and diagnose which burner is faulty. It will require a volt/ohm meter to check each hot surface switch. It will require a volt/ohm meter to check each hot surface switch.

I highly recommend calling a service technician to remove the top and diagnose which burner will need to be replaced. To schedule an appointment call 1-800-469-4663 or
click here.

I trust that this information will help you, thank you have a great day.

 

Read More
CarlosZ -
Sears Technician
May 12, 2015
Q:

what is the correct replacement heating (baking) element for the kenmore electric range 79096019401?

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Yadira B -
December 15, 2012
A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner. Have a great day!

Read More
Alina -
December 15, 2012
A:

I can understand how different the manufacturer replacements can be. The element that was provided for you, #316075104 is a suitable replacement and is rated the same as the original, #316075103 and the substitute. There is only a minute difference in weight and size that would not affect anything. #316075104 is designed to fit 20 different models. The voltage is the same.

If you have any additional questions, please reply. Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
December 16, 2012
See more answers
Q:

Why will the bake/broil functions not work in my Kenmore range model #79096019401?

A:

The bake and broil not working on the range can be frustrating. I found some information for you that I am hoping will help you until your expert answers your question. I am adding the link below to help you with your question while you wait for your expert response. It may take 24-48 hours. i do hope everything works out on the range.

Read More
Marc -
October 24, 2012
A:

Thank you for your question and I understand your concern.

If the bake and broil elements were getting the proper voltage of 220-240 volts, the bake and broil elements would heat if the two elements were good. The voltage must be checked across the two wire leads connected to the bake and broil elements. If 220-240 is measured, the heating element would have to bad.

If the range is getting the proper voltage and the bake and broil elements are good, the faulty component is most likely the electronic oven control/clock assembly. The electronic oven control #316557118 can be ordered from Sears Parts Direct. You will also need to order the clock/control overlay #316419109 .

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
October 25, 2012
See more answers

Top Parts