Model #79096011401 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Change Top Color 79096011401 Kenmore Electric range

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about changing the cooktop color on your Kenmore range model 79096011401. I will be happy to help you with this. I have located the cooktop with a black frame. I have included the link below for you to view and order the part.

SAFETY WARNING: Disconnect the power supply before beginning your repair to prevent the risk of electrical shock which can result in property damage, serious personal injury or even death. If you are not comfortable completing this repair, you can set up service at www.SearsHomeServices.com or by calling 1-800-469-4663 (1-800-4MY-HOME). 

I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
April 18, 2015
Q:

F10 error code 79096011401 Kenmore Electric range

A:

Hello, glad to help.  Thank You for choosing Sears PartsDirect.com. We, at Sears, value your business.
 
I am sorry and do understand your frustration when getting the error code of F10 on your range.
 
Glad to help out.  I’m looking at your Kenmore Range model number 79096011401.
 
F10 = RUNAWAY TEMPERATUE:

Check the sensor probe and replace if necessary.   If oven is overheating, disconnect power.  If oven continues to overheat when the power is reapplied, replace control board.  Severe overheating may require the entire oven to be replaces should damage be extensive.
 
Please "RESUBMIT ANY FURTHER QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 
 

Read More
Larry Jr -
Sears Technician
September 23, 2014
Q:

oven not heating

A:

Having your appliance not working properly can be really disappointing. While you are waiting on an expert to answer your question, a suggestion I have is to add complete model number to this thread so you can get a better answer from the experts! Hope this helps!

Read More
Dezeray S -
July 12, 2011
A:

Thank you for your question and I understand your concern.

As Dezeray S. suggested; adding the complete model number would help in providing model specific information and troubleshooting assistance.

Generally speaking it sounds like the oven control or heating element may have failed. If it has a thermal fuse/switch it may have tripped preventing the oven from heating also.

Reply with the model number and additional details if you have a volt/ohm meter and you plan on diagnosing and repairing the range yourself. It will require making voltage and resistance checks using a volt/ohm meter.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
July 13, 2011
A:

I have a sears oven, model # 790.96011401, the element burned out, we just replaced it with a new one, and it is still not working?

Read More
kristie -
August 07, 2012
A:

Hello Kristie. When an element burns out, it will sometimes damage the clock control board in the console. I assume that the stove top burners are heating properly. If not, I recommend that you check the house circuit breakers for the range. Check to see if the broil element is heating. This will check to see if that the control board is getting proper power and is closing the broil relay properly in that mode. If the broil element works, then I recommend that you UNPLUG the range and check the back of that control board for a burnt spot or apparent damage. I provided a link below that shows how to access and replace that clock control board. You don't have to remove it yet. You can check the board for a burnt spot and check the wiring connections that are highlighted on the wiring diagram in the image below. Make sure that the blue wire is properly connected and it not damaged. You may not see any visible damage to the board even though it is bad. A technician would normally check the voltage on the blue and orange wires in the bake mode to see if the control board is sending the 240 volts to the bake element in the bake mode. I don't recommend that you check that issue yourself unless you are completely confident that you safely test that live voltage using a volt/ohm meter. Wear electrical safety gloves and safety goggles if you decide to check that live voltage yourself. Unplug the range as soon as live testing is completed. If that control board is not sending voltage to the bake element then that control board will need to be replaced. You can order that part from this page: Clock Timer Control Board for Kenmore Range Model 790.96011401 . You may also need the overlay if you cannot reuse the original one as shown in that video below. (Continued below)

Read More
Lyle W -
Sears Technician
August 08, 2012
A:

Be sure that you UNPLUG the range before replacing that clock control board. I hope that this information helps. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
August 08, 2012
See more answers

Top Parts