Model #79095923301 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

baking and broiling elements do not heat but convection fan works no errors on control pad power getting to element ends continunity thru element

A:

When the range malfunctions dinner time may become take out and that is not something that is good long term. I found a similar question from a previous expert post that may give you an idea of a cause while you wait for the expert to review your model. I attached the link below. If you decide you would feel more comfortable having an experienced technician diagnose and make repairs, an option is to visit Sears Home Services and use the handy scheduler. Hope you can get back to home cooked soon.

Read More
Barbara H. -
January 15, 2011
A:

The answer Barbara H sent has good information about your problem.

If you measured the voltage to the element between an element wire and ground or neutral, you are probably not getting both sides of line to the elements. If you measure across the element terminals, you should get 208-250 volts ac.

If all the wires are good and the top elements are working, the electronic oven control (clock) is probably bad.

If you have continuity through the elements, the elements are good.

The wiring schematic for your range is the same as the one in the answer for the oven wiring. The clock sends L1 and L2 to the elements.

Read More
Jimmy K -
Sears Technician
January 17, 2011
See more answers

Top Parts