Model #79095683302 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Simmer Select burner no longer heats up. 79095683302 Kenmore Electric range

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
May 13, 2014
Q:

Kenmore Electric Range #79095683302: While baking, heard a popping noise, now niether bake or broil element work.

A:

I'm sorry to hear that you are having some difficulties with your range . I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assist you.

Read More
Jackie S -
October 27, 2011
A:

Check to see if the cook top elements heat. If they do, then it is likely that you have a failed clock control board in the console. The popping noises that you heard were the relays on that control board shorting out. The display may still work but the relays are probably damaged. You can probably fix this problem yourself by replacing that clock control board (part 316207511). You may also need the overlay (part 316220841) unless you can reuse the original one that is one the range. Before ordering that part, you can unplug the range and check the wiring on the control board. Here is a video that shows how to access that clock control board: Range Clock Control Replacement . You will probably see burned spots on that back of that control board. If you find no wiring problems, then the control board will probably need to be replaced. You can order that part from the Sears PartsDirect website. Here is a direct link for the clock control board: Clock Control . Here is a link for the overlay in case you need it: Overlay .

These tips should help you resolve this range problem. If you need more assistance, reply with additional details.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
October 28, 2011
See more answers
Q:

My Kenmore electric range 790.95683302 gives an F1 error and won't stop beeping, why?

A:

The F1 error code can indicate a few conditions:

  1. Shorted Keypad
  2. Control's internal checksum may have become corrupted
  3. Control has sensed a potential runaway oven condition. Control may have shorted relay, RTD sensor probe may have gone bad.

Reset the range by disconnecting it from the outlet or switching off the circuit breaker for 20-30 minutes, then restore the power. If the reset doesn't help and the F1 continues to flash, the EOC (part #316207511) may need to be replaced.

If you do not feel comfortable performing the procedure(s) in the images below, I recommend scheduling for a technician to come out to diagnose and repair your range.

Read More
Korinna S -
Sears Technician
March 03, 2010

Top Parts