Model #79095683301 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Oven elements 79095683301 Kenmore Electric range

A:

Thanks for the inquiry and for being a valued member.

I am sorry to hear of the issue you're having with the range. I know how frustrating that is to have happen.

I suspect the power relay on the electronic control board may have shorted. The symptom described where the oven doesn't work but the stove top still does would match up. I would recommend having a service technician assist with the diagnosis and replacement of the board if that turns out to be the issue. The electronic control boards are sensitive parts, and can be easily damaged on an install.

If you would feel more confident have a Sears Home Service technician help assist with the diagnosis/repair, you can call 1-800-469-4663, or click here to be directed to the page to set up service.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
March 27, 2015
Q:

kenmore electric range mdl 790.95683301 neither the oven bake element nor the oven broiler element heat. The cook top burners all work just fine.

A:

i think "biker dave EXPERT April 22, 2009" on another post may be what I need to check, re: oven on and 220v between BK and l2 out.

Read More
Ed -
April 04, 2013
A:

Thank you for your question. I know it's frustrating when the oven stops working. If you are disconnecting a wire off of the elements and get 0 ohms, the element is defective. It should read approx. 10 to 25 ohms. The sensor should read approx. 1100 ohms at room temperature. Again make sure at least one of the wires is disconnected. When checking voltage, be very careful. Make sure everything is still connected (no loose wires). First, check from L1 to L2 in for 220 volts. If the voltage is there, set the oven to bake and check from BK to L2 out. It should read 220 volts. If this voltage is not there, check from BK to L2 in. If the voltage is there, the control will need to be replaced. I hope this will help you. If you would like more assistance, reply to this thread and I will assist you further.

 

_Safety Notice_: Be sure to disconnect the appliance before performing any troubleshooting procedures. If you are not comfortable with doing any voltage checks or repairs that might be recommended, please contact a local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Scott D -
Sears Technician
April 05, 2013
A:

For now no further assistance is required. This is to just let you and others know of my findings: Oven Off: L1 to L2 = 220V Bake set to on: BK to L2 out = 0 v BK to L2 in = 220V I shall be ordering the control board, thanks, Ed

Read More
Ed -
April 07, 2013
A:

Ed, thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
April 08, 2013
A:

Replacing the control board indeed has fixed the problem. THANKS!!!! Ed

Read More
Ed -
April 11, 2013
A:

Ed, I'm glad your oven is now working. Thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
April 12, 2013
See more answers
Q:

Kenmore Electric stove not heating, stove top working perfectly

A:

A non working Oven is not something any of us want to see. If you are technically handy, this is a good site to get instruction and fix some things yourself. If you do not feel confident doing your own repairs, an option is to visit Sears Home Services and use the scheduler. While you wait for the expert to review your model, you can check the bottom links for some possibilities. Hope this is of help.

Read More
Priscilla V -
July 25, 2011
A:

It sounds like something in the range shorted and tripped the circuit breaker. Inspect the bake element for rough or bubbled areas. If the element shorts it usually bubbles up on the outside of the element.

If the bake element is shorted and you would like to repair it yourself, reply on this thread and advise if you have ordered the element. I will provide you instructions for replacing the element.

You can see a parts diagram and order parts at Parts Direct

Read More
Jimmy K -
Sears Technician
July 26, 2011
See more answers

Top Parts