Model #79095680302 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

I have a Kenmore smooth top electric range model # 790.95680302 and have a new right rear burner to install. I was told I could find directions for installing

A:

Good morning... It's excellent that you desire to make money by not spending it. I feel confident you will be able to do the job yourself. l have located an very thorough link that will walk you through the process. The model number is very similar to yours so the mechanics may very well be identical. Review this data and be aware that an expert will be responding within the next two business days if not sooner. I hope this helps and have a nice day

Read More
Henry -
November 05, 2012
A:

The basic procedure for replacing a radiant surface element on that type of range is shown in the image below. Be sure that you unplug the range before accessing internal components. Be careful when you lift that ceramic glass cooktop.

If you need more help, let us know.

Read More
Lyle W -
Sears Technician
November 06, 2012
See more answers
Q:

Kenmore Oven Model 790.95680302

A:

A non working Oven is not something any of us want to see. If you are technically handy, this is a good site to get instruction and fix some things yourself. If you do not feel confident doing your own repairs, an option is to visit Sears Home Services and use the scheduler. While you wait for the expert to review your model, you can check the bottom link for some possibilities. Hope this is of help.

Read More
Priscilla V -
February 01, 2012
A:

Thank you for your response. I looked at the first thread but the attachment there gives me an error, so I was unable to view it and follow those instructions. However, I did remove the back panel and I can see where the problem is (circled in red). Could you take a look at the attached images and let me know if you think the electronic oven control is what needs to be replaced? I am not sure anymore after seeing the back. Thanks.

Read More
Brad -
February 01, 2012
A:

I am sending you an image of the wiring schematic for your range. I am assuming you can access the wiring connections on the bake and broil elements and the back of the clock. Be careful when testing live current. You can be shocked or burned if you touch the wrong parts at the right time.

With the range connected to electricity and the clock set to bake at 350 degrees test between terminals L1 and L2 IN on the back of the clock. This is the line voltage we need to operate the elements. You should read 220-250 volts ac.

If you have that voltage test between terminals L2 OUT and BK on the back of the clock. You should have between 220-250 volts ac. If you don't have this voltage, test between L2 IN and BK. If you have the voltage here and not at L2 OUT and BK, the relay on the clock is bad and the clock needs to be replaced.

If you have the voltage at L2 OUT and BK and the bake element is not heating, the bake element is bad or a wire is broken between the clock and element.

Do this same test between L2 OUT and BRL to test the broil element.

Looking at the images you sent seems to be the back of the socket for the oven lamp. The black material is probably soot that has leaked out of the oven while it was cleaning. This is normal and you should not be concerned by it.

If you have questions, reply on this thread and I will be glad to help.

Read More
Jimmy K -
Sears Technician
February 02, 2012
See more answers
Q:

Kenmore Drop in Range model 79095680302

A:

I'm real sorry to hear that you are having some difficulties with your Kenmore Drop-in Range, especially during the holidays. I did some research for you at Managemylife and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices. I hope these links provided assist you.

Read More
James -
December 28, 2011
A:

You did not mention whether the stove top burners are working. If the surface elements do not heat, then I recommend that you check the house circuit breakers or house fuses for the range electrical outlet. A voltage supply failure would cause that type of problem.

If the stove top burners work, I recommend that you check to see if the broil function works. If the broiler works but the bake element does not heat, then I recommend that you unplug the range and check that bake element as shown in this brief repair video: Bake and Broil Element Testing . Here is a video that shows how to remove that bake element: Bake Element Replacement . That element should measure between 10 and 40 ohms of resistance. If that bake element is bad, it will need to be replaced. You can order parts from the Sears PartsDirect website.

If the bake element is okay or the broil element fails to heat, then you can unplug the range and check the wiring connections on the back of the clock control board. Here is a link that shows how to access that clock control board in the console: Range Clock Control Replacement . Be sure that you unplug the range before accessing internal components. You do not have to remove the control board to check the wires. The image below shows a wiring diagram with the wires for the oven elements traced in the wire colors that they use. Check those wiring connections. You can also check the resistance through those element circuits from the wires that connect to the control board. If the wiring connections on the control board are okay and the element circuits are good then you will probably need to replace that clock control board (part 316207511). You may also need the overlay for that clock control board unless you can reuse the original one a shown in that video. Be sure that you unplug the range before replacing that clock control board.

If you need more help, reply with additional details and we will assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
December 29, 2011
See more answers

Top Parts