Model #79095599100 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

F1 code

A:

Understanding the error codes on appliances can help get them working much sooner. While you wait for the expert to review your model, you can check another expert post for this error code F1 on a 790 range. I attached below if you would like to check it out.

Read More
Joseph P. -
September 08, 2011
A:

The information in the image below tells you about the F1 error you saw.

From the the description you give I suspect a relay on the control stuck closed.

You will most likely have to replace the electronic control.

It would also be a good idea to check the oven sensor for resistance if a meter is available.

Unless you have a meter and are comfortable with do-it-yourself I suggest a technician check and repair this problem.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

You can reply with any additional details or questions for further assistance. If you have a meter and are comfortable with do-it-yourself then let me know and I'll provide some additional information about how to access the control and the sensor.

Read More
Fred M -
Sears Technician
September 11, 2011
A:

I have a double electric oven lower oven error code f1 model # 91148065690. I have a meter to check relays any info would be helpful thanks.

Read More
roy -
February 20, 2012
A:

On this particular unit the F1 can mean a stuck keypad or a stuck relay on the control. You won't need a meter to check this problem but you will need to access the control and remove the ribbon to the interface. _Be sure to turn the power to the unit off first._ The images below may be helpful to you. Check out the information and let me know if you wish to give it a try. Remember to turn the power off first.

Read More
Fred M -
Sears Technician
February 21, 2012
A:

my model number for my oven is 7909532903 and I f1 code on my can you help me?

Read More
Angel -
June 23, 2012
A:

The F1 error on this particular range can mean a couple of things. The image below contains more information on this. It can be a stuck keypad ot it can indicate a problem with the sensor. The sensor would require a meter to check. Sorry for the delay I have been on vaction for a few days. I'm back in the saddel now and if you have a meter and are comfortable with do-it-yourself let me know and we'll proceed further. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: [Sears Home Services | http://www.searshomeservices.com?sid=MMLxexpertxmerch] .

Read More
Fred M -
Sears Technician
June 25, 2012
A:

I'm sorry try this linke to have the unit repaired: Sears HOmes Services .

Read More
Fred M -
Sears Technician
June 25, 2012
A:

I am receiving the F1 error on model #79094681300 electric range, the door locks then unlocks, then begins to beep, elements appear to be ok, I did hear a pop during use of the oven yesterday when the problem occurred

Read More
frank -
December 31, 2012
A:

The image below contains the usual causes of the F1 code. A stuck or shorted keypad is the first suspect. Can you still select various options and cycles? If you can select cycles and options then the problem might be the temperature probe. This can be checked with a meter if one is available. Now that the holidays are over my reply should be a little quicker.

Read More
Fred M -
Sears Technician
January 03, 2013
See more answers
Q:

Why won't my Kenmore oven shut-off and displaying "F1"?

A:

The "F1" fault code is indicating:

  1. Shorted key pad
  2. The control's internal checksum may have become corrupted.
  3. The control has sensed a potential runaway oven condition. The control may have shorted relay, RTD sensor may have gone bad.

I recommend calling a service technician to diagnose and repair your electric range. The failure is likely the control board.

Read More
Joey S -
Sears Technician
March 10, 2009

Top Parts