Model #79095592102 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
  • Wiring Schematic
    3 Results
Find part by diagram >

Question and Answers

Q:

Malfunction 79095592102 Kenmore Electric range

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is trouble with the range.
 
Glad to help out.   Im  looking at your Kenmore Range model number 79095592102.

Here below is the information on the code F1:

Likely Failure Condition/Cause:

1.  Shorted Keypad.

2.  Control's internal checksum may have become corrupted.

3.  Control has a potential runaway oven condition.  Control may have shorted relay, RTD sensor probe may have gone bad.

SUGGESTED CORRECTIVE ACTION:

1.  Replace computer board.

2.  Disconnect power, wait 30 seconds and reapply power.  If fault returns upon power-up replcace EOC-Electronic oven control

3.  Check RTD sensor probe and replace if necessary.  If oven is overheating, disconnect power.  If oven continues to overheat when the power is reapplied, replace EOC.  Severe overheating may require the entire oven to be replaced, should damage be extensive.

Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs. Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
March 24, 2014

Top Parts